How do I black out chrome window trim?

[lllDreaMz]

Hey guys, iv seen a few ppl on cardoman and a couple other sites with gen 6 camrys with the window sills or the window weather stripping, (the chrome around the windows on the outside) in black, does anyonw know how to make them black, or if u can biuy them in black ?

like my car?


if so just buy some black vinyl n cut it small n put it on, razor n done

[lllDreaMz]

yea exactly how urs is, shit looks dope man...wheres u get the vinyl from ?

ebay

[Punks_Not_Dead5]

You can use black electrical tape as well.

^Punk i tried that but i wont last that long, n the vinyl been on for 6+months n going good

[MrSo0h0o]

Originally Posted by -Kenny-

^Punk i tried that but i wont last that long, n the vinyl been on for 6+months n going good

i went the black electrical tape way and it has been on perfectly fine now for 2-3 months so far... went through a couple of rains and a big snow storm already

[Aldo1122]

Originally Posted by MrSo0h0o

i went the black electrical tape way and it has been on perfectly fine now for 2-3 months so far... went through a couple of rains and a big snow storm already

I love that tape i use for so many things

[Pawel062]

i think duplicolor metalcast also could work good here. make it more unique ie a dark chrome instead of black.

[Redline_Me]

Originally Posted by Pawel062

i think duplicolor metalcast also could work good here. make it more unique ie a dark chrome instead of black.

It would be such a bitch to paint tho. Just think about the masking and covering the car so the paint doesn't get on the rest of the car.

[Pawel062]

Originally Posted by Redline_Me

It would be such a bitch to paint tho. Just think about the masking and covering the car so the paint doesn't get on the rest of the car.

was thinking remove them or buy new. should be pretty cheap. i know the one that is on bottom of window is since we replaced it on the old gray camry when it had door blended.

[sxe-10]

Originally Posted by Pawel062

i think duplicolor metalcast also could work good here. make it more unique ie a dark chrome instead of black.

I tried that, i did 12 layers and it chips easily even with a good sand down. Recently we experimented on my friends beater with chrome trims with plasti-dip and so far is lasting and no chips. This turns to a rubbery plastic when it dries and is weather-proof.

[markymark975]

Originally Posted by sxe-10

I tried that, i did 12 layers and it chips easily even with a good sand down. Recently we experimented on my friends beater with chrome trims with plasti-dip and so far is lasting and no chips. This turns to a rubbery plastic when it dries and is weather-proof.

+1 on the plasti dip

[untitlejk]

Trimbrite black out tape *pics*

[CamrySExxx]

+2 on the plasti-dip