Raw Custumz 07 Camry Update Thread....

[rawcustumz]

I guess I will start one so I dont have to keep posting short threads
This is my wifes 2007 Camry that I will lightly modify as funds are there.


First thing I did was the H.I.Ds
Got a kit off ebay they are 8k w/ a light blue look
Still need to fix the squriel spotters just need time to take headlights all the way out to do it right.


2nd Thing I did was the SE Mesh Style Grill
Got this off ebay also, it fits perfect no modding nessary just clipped right in and put 2 screws back to keep it in place


3rd Thing I am trying to do is get fog lights from Alfaottoparts
I have had nothing but problems trying to order them but I am going to put my problems aside since many of you have had nothing but good things to say, so I am going to keep trying.

I have these TRD decals that I trying to decide where to put, thinking just one on the right rear across from where the camry is, any input??
I will be removing the LE in the bottom right corner and possibly the Camry in the top left corner.


Not sure whats next but it will prob be interior speakers, Alpine maybe Kicker depends on what I can get them for.
If you would like to see more and bigger pics please click on my cardomain page below.
Thanks for looking and any comments are welcome
Bernie

[private_number]

Nicee, Never seen them blue TRD stickers before. Welcome to the forums btw

welcome to Tn

[kazakh]

Looks good! Good start
IMO SE grille would look better.
Next, get a rear spoiler, it won't cost much and will change the look.

[Pawel062]

never seem that trd badge too... nice.

good start. though u might want to consider around 5k hids to see more at night and especially during rain/fog.

some inexpensive mods come to mind... black out headlights, tint tail lights, black out emblems, debadge, and led swap.

[LOV]

Welcome to TN.

[Netforcer]

I guess you caught the mod bug... even modding your wife's car

Good start

[SE_Toy]

Looks good.

[Redline_Me]

Forget those fogs, get some ES300 projector fogs and mount them on there. You'll love them.

[Pawel062]

+1 on the es300s. if u didnt get fogs yet just go get some es300 fogs and a hid kit. if u have a harness on low beam hids then u can run the es300s off the other low beam plug.

[ebumdude]

Looks good, welcome to TN!

[rawcustumz]

Thanks everyone for your input and kind words
I do plan on tinting the rear tails, ? should I have them done a paint shop or just do them myself with knite shade. Ive done rear tails before on a different car and they turned out nice but more worried about them peeling in the long run.

Is there a link to the fog for the es300 and also a link to the harness for the hids I knew there was one more thing i needed to do for the hids besides the squirrel spotters

I ended up using just one of the decals and I placed it opposite side of the camry emblem at a slight angle. Now im going to remove the LE and the dealership decal today.

Are there any other mods that can be done without breaking the bank?

Thanks again
Bernie

[Pawel062]

well when doing spotters u can black out the headlights. or u can skip the spotters, find some solara projectors, and retrofit. can get harness here:
http://www.theretrofitsource.com/pro...a802f2aab23a7f

here are the fogs:
http://cgi.ebay.com/ebaymotors/LEXUS...#ht_820wt_1165

u can get a hid kit for the fogs for 47shipped at ddmtuning.com

[tkeen1]

Originally Posted by rawcustumz

Thanks everyone for your input and kind words
I do plan on tinting the rear tails, ? should I have them done a paint shop or just do them myself with knite shade. Ive done rear tails before on a different car and they turned out nice but more worried about them peeling in the long run.

IMO, your best bet would be to use vinyl. The taillight is a simple design so it shouldn't be to hard to apply. If you need a custom cutout I have a little trick you can use. Just shoot me a PM.

I use MetroDecals to get my stuff. They have an ebay store and an online store as well. GL man!

[mingming]

Originally Posted by tkeen1

IMO, your best bet would be to use vinyl. The taillight is a simple design so it shouldn't be to hard to apply. If you need a custom cutout I have a little trick you can use. Just shoot me a PM.

If you have patience and time then you can do it, but simple design and being easy? Corner bulges are a pain to get right. If you do vinyl do the whole tail light and then cut out the middle part if you plan on doing that.

I would do the spray tint cus its easier