Currently installing a Kenwood HU in my Wifes 2010 LE. Needs advice on SWC Harness

[Limp Fox]

Hey everyone I am currently installing a Kenwood dnx8120 in my Wifes 2010 LE. I never hooked up a SWI Control module (PAC) before. I have the 12 volt and ground ran. The White wire is what's giving me a issue. Where is the factory harness that I am supposed to tap into to hook this White wire up to? A picture would be great. According to the PAC oem Camry harness pin out there should be 20 wires in the plug not running off the main harness and I do not see what they could be talking about unless it's in a different area or I'm having a blonde moment so please help

Thanks
Judd

[Limp Fox]

found a sticky and identified the plug. i read into it to much. the 20 pin plug does not have 20 wires coming out like i thought they meant but rather 8 or something close to that. when i press and hold the button and turn the key forward it will light up like it's supposed to but when i move to the next step where i have to press the button 8 times to learn the program i get no blinks in between. any one know what the issue could be?