Engine Build Advice

[Camry2NR]

Hey everyone I am back after a long absence. My 2002 Turbo Camry is now going into the shop once again. Due to receiving bad gas after a car show in Spartanburg, SC my engine is now in car heaven. So before dropping in another engine I want to get it fully rebuilt to be able to push out 500whp. My plans are to bore it out, sleeve it, drop in forged 89mm wiseco pistons, rods, bearings, valves, springs, camshafts, replace my manifold with an even length turbo manifold, up my injectors to 750cc or better and tune for 20psi. Oh and my car is still an automatic. I already had my tranny fully rebuilt with a high stall torque converter and many components from the is300 tranny to be able to hold past 500hp. I added a Dezod Motorsports high flow fuel rail as well. In your guys opinion do you think this is enough to accomplish my goal? If not what else should I add to safely be able to accomplish this goal?

Oh and I know I have promised videos of me on the track in the past. So if you want to see my Camry beating a 05 Z51 Corvette in the Quarter at Rockingham Dragway in SC you can go view it on our facebook page of RacelinePM. I beat it twice. The announcer at the track was funny in my opinion.

[Pawel062]

best is to go to the shop that will be rebuilding it and tell them ur power goals and they will build it to that spec. but sounds like you should be fine. just make sure u also can grip.

[Agent556]

Update your car domain, I want to see pics of the new wheels on your car, lol

[workerant]

Where's the video? I couldn't find the link.

[profuse007]

Sounds like an expensive project. Good luck and post the build.

[scamry]

how'd the is300 bbk work out?

[Camry2NR]

Originally Posted by scamry

how'd the is300 bbk work out?

I didn't get the chance to see if it would work. I was in need of cash and sold them to my buddy who has a is300.

[Camry2NR]

Originally Posted by workerant

Where's the video? I couldn't find the link.

Here is the link to our facebook with the video of me racing the corvette in the quarter.
http://www.facebook.com/racelinepm?v...=1391592803258

[Camry2NR]

Originally Posted by Agent556

Update your car domain, I want to see pics of the new wheels on your car, lol

You have a good point. I havent updated my cardomain page in a while. I have much to add. Like my video sunvisor screens, my Turbo Camry trunk lid, plasma plate built into my trunk floor that shoots lightning through my floor when my base hits, my new headlights, led underbody kit and strobe lights to name a few.

[Redline_Me]

whatever job you got, i want it. Looks like you make a lot of $$$ to be able to do all that to your car.

Good luck, hope to see it happen soon.

[Camry2NR]

Originally Posted by Redline_Me

whatever job you got, i want it. Looks like you make a lot of $$$ to be able to do all that to your car.

Good luck, hope to see it happen soon.

LOL. 16yrs in the US Army bro. I am an E7/ Sergeant First Class. I try to manage my money right. Plus our team has an online store and we have a team account for when we win money at the carshows. We take care of eachother's cars. 80% of the stuff done to my car me and my team did besides the engine stuff of course.

[JSM1284]

I'm curious as to what IS300 RWD transmission components were used in your trans....

[Camry2NR]

Originally Posted by Agent556

Update your car domain, I want to see pics of the new wheels on your car, lol

Here's a few updated pics.

[Pawel062]

car is looking better and better. i'd just drop the rear wing, custom headlights, custom tails, coilovers, and bbk.

can't wait to see that motor built out.

[Camry2NR]

Originally Posted by JSM1284

I'm curious as to what IS300 RWD transmission components were used in your trans....

According to the transmission shop that built my tranny they said they where able to use there gears and some of the clutches since the IS tranny is a lot stronger than the normal Camry Tranny.