Where to find a rear brake backing plate? - Toyota Nation Forum : Toyota Car and Truck Forums

nickf829 · 10-23-2010, 04:14 PM

I'm in need of a rear brake backing plate, I can't find the part number on the plate, and I can't find the part number in the manual provided by this website. Any ideas of where to look?

Luna2 · 10-23-2010, 05:44 PM

Quote:

Originally Posted by nickf829

I'm in need of a rear brake backing plate, I can't find the part number on the plate, and I can't find the part number in the manual provided by this website. Any ideas of where to look?

Try here: https://www.1sttoyotaparts.com/oempartscat.html

The link didn't go to the correct page. Look under "Brakes".......

Or.....

Try here: http://www.toyotapartsales.com/partl...layCatalogid=0

***LynchburgCSI*** · 10-23-2010, 06:05 PM

If you give me a year, trim, and engine I can look up the part numbers for you.

nickf829 · 10-23-2010, 08:03 PM

Thanks for the offer. It's a 2003 Camry SE - 3.0 V6 with rear DISC brakes. I doubt you would need more than that, if so, let me know. Thanks again.. If i can get the part number, I can do a search online to see if I can find any... its an odd part to replace so I doubt there is an aftermarket for it, which sucks, because I'm sure Toyota will want an arm and leg for it.

Luna2 · 10-23-2010, 08:13 PM

Quote:

Originally Posted by nickf829

Thanks for the offer. It's a 2003 Camry SE - 3.0 V6 with rear DISC brakes. I doubt you would need more than that, if so, let me know. Thanks again.. If i can get the part number, I can do a search online to see if I can find any... its an odd part to replace so I doubt there is an aftermarket for it, which sucks, because I'm sure Toyota will want an arm and leg for it.

Look at post #2.

***LynchburgCSI*** · 10-23-2010, 08:17 PM

If your vin starts out as 4T1BF32K then this should be it. If not, let me know.

Left: Part # 46504
Right: Part # 46503

Edit: car-part.com and local junk yards may be a good bet.

nickf829 · 10-23-2010, 08:42 PM

The VIN starts with 4T1BF30K

Thakns for pulling that for me

It's looking like $200 is the average price for these... that's not what I wanted to see.. if I get the parts number I'll see if I can find any online for cheaper, but its looking doubtful

It looks like Monday will be a day filled with calling local junkyards.. great

Thanks a lot for the help, I appreciate it

***LynchburgCSI*** · 10-23-2010, 09:15 PM

Yep, that diagram is the right one. DEFINITELY look at car-part.com so you know WHERE to call.

***N/A Camry Sleeper*** · 10-23-2010, 09:24 PM

I bet I walked past two or three of these today in the salvage yard - I will look again tomorrow if you are interested in a used part. Will a Gen4 Camry or Lexus IS300 backing plate work for you? Let me know...

nickf829 · 10-28-2010, 07:54 PM

Thanks for the help, I found the backing plate at a junkyard on the other side of the state. They have to UPS the part, better than paying $200 from the stealership though.

Any idea what size bolts hold the hub to the spindle? I think its a standard grade 8 10x1.25 but I don't know if Toyota uses oddball sizes or not.