2006 Camry 2az-fe cam sprocket timing marks?

[lognom]

Hi,
I have a problem identifying which cam sprocket mark is the timing mark.My camry cam timing sprocket (on the exhaust camshaft) has 3 marks. There is a dot marked "I", 180 degrees opposite is a dot marked "E", and in between there is a third mark, which is simply a slot. The service manual says to align the timing mark with the arrow on the bearing cap, but the manual doesn't say which of the three sprocket marks is the timing mark.
I'd greatly appreciate any assistance.

Thanks,
Lloyd

[littleslim1474]

For the exhaust cam you line up the yellow tooth with the dot thats stamped in to gear itself. For the intake cam you line it up the the slot that goes across gear. Install the front cover and tensioner. Turn the engine over twice to TDC again and recheck your mark with your cam caps. For the small chain you line up the yellow marks on the chain with the dots on the small gears. Hope that helps

[lognom]

Thanks littleslim.

Lloyd