Help request air intake for 2010+ camry 2.5L - Toyota Nation Forum : Toyota Car and Truck Forums

lilajto · 04-25-2011, 06:24 PM

I emailed K&N and they told me to request it here:

http://www.knfilters.com/products_needed/default.aspx

Im guessing if we have enough people to request, they'll do it. Help me out and request a K&N air intake for the 2010 and up camry with a 2.5L engine.

***arabianobsession*** · 04-25-2011, 06:59 PM

I have requested this myself.....approximately 6 months ago. I emailed them recently and they say they still have nothing in the works. Now, I know TRD has an intake out for the 2011 tC, which shares our 2.5 I4 motor, and I think it could work with some minor modifications.

Or we could make our own

Redline_Me · 04-25-2011, 08:56 PM

We have tried this on the forum for a lot of parts and it hasn't worked. So it's a waste of time.

You might as well get one for the 2.4 and mod it a little if you have to at all.

***arabianobsession*** · 04-26-2011, 08:44 AM

^Explain?

gs_aristo · 04-26-2011, 11:51 PM

Im sure in due time someone will make one.

***Punks_Not_Dead5*** · 04-27-2011, 08:52 AM

Custom.. it saves you 300 bucks for other mods. All you're paying for is the K&N name anyway.

11LE · 04-27-2011, 01:47 PM

Plus the piping on the K&N doesn't really have much thought. Straight pipe with a bend. After getting the MAF mount sorted out, a DIY SRI is much cheaper.

On the other hand, I went and popped the hood of a 2011 TC.. the spacing and orientation in there is pretty close to ours, except the intake doesn't go to the grill, it goes from the wheel well.