FYC 02' Camry Build

[fckyourcrew]

What's going on guys. I've been on here for a cool minute... Mostly lurking.
Deciding to make a build thread, but just to inform you... I'll be moving very very slow.
Just because i can never make up my mind... I'll keep ya'll updated.

Current mods
-Visors
-5K HIDS
-Updated Grill
-Window visors
-Cheap leather seat covers... stock grey ones get dirty so fast
-LED interior/trunk
-Taillight smoke

Planned mods
-springs
-tint
-black roof
-wheels
-custom fogs, either dual or single...

[fckyourcrew]

I had some smoked vinyl laying around, so i decided to tint the tails.
It's growing on me, but currently it needs some to contrast with. I'm hoping that the black vinyl roof and tint will accent it.

[Punks_Not_Dead5]

Nice start.

Tint your windows and that will help with the contrast between the tails.

[aznbigbearjohn]

ahh i was gonna tint my tails yesterday!

[fckyourcrew]

I dont post much but heres a little update.

Couple months ago i got Sprint Springs, ended up cutting two coils in the front cause the rear sagged.
Ride was cool then it got bouncy.

Here's a picture of my new set-up, Which are K Sport coilovers. I am about 2 1/2 inches low from the ground to the frame. Up next, are wheels.

This is the only picture i have, i'll get some better pictures up soon. Pictures don't do justice but the car is slammed...

[LoudCamry]

Good job with the coilover, New wheel wiill make your car look even better.

[BlackG5]

more pics.


measure the frame too, I'm curious to see how low k-sport can go.. My BC is maxed up front and has 2 inches to my frame--rear has probably 2 more inches to go lower..

[fckyourcrew]

Shitty video my buddy took
http://www.facebook.com/v/10150495602999115

[fckyourcrew]

Rolling shot down to San Diego for VIP Festival, Slammed my subframe twice on the way there...

[Punks_Not_Dead5]

You need rims badly.. The wheels you have now look out of place.

[BlackG5]

any plans for wheels? pm me if you're trying to decide on a size..

IMO, car doesn't look right at all slammed on stock wheels with fat tires.

but, that thing is LOWWWW, looks way lower than mine.

[fckyourcrew]

I was thinking about 18's but i want to be low, so 18's wouldnt work with my set-up.
I'm thinking about running 17's, the wheels i'm deciding if i want some Work Eurolines or some Bmw OEM style 5's (Leaning more on this side) and down the long run, since these are two piece oem wheels, i can take the face and slap them onto BBS RS lips, possible run a 17" front & 18 rear for the tuck look. I'll be running adapters to accomade the correct PCD as well. This is my goal for summer 2012

[BlackG5]

You can most definitely go low on 18's with a bit of camber.. I was only running -2 up front/-2.5 rear and had about 2 inches of frame clearance, 18x9.5 +38/+25... the lip sat flush, you could easily tuck and be sitting on the ground.. my buddy in FL has his gen5 at -4.7 camber front/rear with 18x9.75 +20 all around sitting flush in front and tucking a bit in the rear.

I like the stagger idea tho, 17 front, 18 rear, and the style choice is cool too, its nice seeing different stuff.. I'm thinking about 18 front, 19 rear since I don't wanna go as low after i get the lip kit..

[fckyourcrew]

I need to get skid plates to protect the oil pan and what not. On average, i slam my subframe 2-3 times a day and it sketches me the f**k out.

[fckyourcrew]

Video of me in the background cruising with the homie

You Tube

You Tube