Venza Rims were?

[Pilot0617]

Hello guys I am at 24,000 miles on my 09 SE and it will be soon time to change the tires so I was thinking might as well get new rims to. So I was looking in to the Venza rims so mi question for you Forum gurus, were do you guys think i could get a used set other than ebay? and if some one has them on there Camry and can post a picture that will be great.

[Snomax]

Those 20's may be pretty brutal weight wise.

Are you sure you want to go that route?

[Pilot0617]

Originally Posted by Snomax

Those 20's may be pretty brutal weight wise.

Are you sure you want to go that route?

Well I am open to options or suggestions but when it comes to rims and sizes offsets and all that stuff I am a complete knob. I am considering the lexus 18''

[cocoLatte]

i actually like the current matrix's XRS rims.

[Pujols85]

Yes venza's are 20. Haven't seen them on a camry yet. But have seen them on a corolla. Good luck on finding a deal. I been searching craigslist eBay and local shops. I wanted to throw them on my 06 highlander but traded in the highlander for the camry. Honestly I think they are nice. But unless you get a dumb cheap deal on just the rims then it Would be costly to 1 purchase rims and 2 replace all 4 tires. I'm sure when you put that number on paper, you'll rather put that number on some after markets.

[Snomax]

Originally Posted by Pilot0617

Well I am open to options or suggestions but when it comes to rims and sizes offsets and all that stuff I am a complete knob. I am considering the lexus 18''

There is a wheel & tire thread on this site, dedicated to that very thing.

Read the ENTIRE thread to get you comfortable with offsets and the like(it helped me tremendously)

After that, just start hitting multiple websites until you see something you like.(it took me about 6 months)

And dont be shy...hit other enthusiasts sites also...not just Toyota.

[Pilot0617]

^ Thanks just saw that thread, good stuff

[Punks_Not_Dead5]

The XRS rims won't fit FYI different bolt pattern.

As for offsets for the Camry stay between +40 and +45 or +48.

[touringcamry]

Originally Posted by cocoLatte

i actually like the current matrix's XRS rims.

I'm 90% certain those are 5x100mm; Camry uses 5x114.3mm bolt circle.

[sixsix]

the venza's come with 19"s too
http://i868.photobucket.com/albums/a...EWTOYOTAWM.jpg

I would assume that the hub bore would be the same?

[Punks_Not_Dead5]

^ most hub bores across the Toyota lineups are the same.

[sixsix]

Kinda what I figured. I'd like to see what those 19s would look like on a Camry.

[Pilot0617]

I saw a member here once that those wheels on hes camry but that was back in January and the looked good whit a nice drop.

[kingnba6]

venza rims are the shit ! best oem from toyota i think. other than the trd ones

[Punks_Not_Dead5]

^ which TRD ones? There are several.