*HELP PLEASE*just installed SRI for 2007 camry v6

[camryman54]

hello all, im currently unable to drive anywhere until i can get a confirmation of how the Short ram intake from K&N works. I followed all instructions yet i have a giant holes coming out of multiple places and a giant leftover hose that came in the box. PLEASE ALL HELP IS APPREICATED. (btw i dont know much about cars so any help is good)

thank you
http://imageshack.us/photo/my-images/705/car1tp.jpg/
http://imageshack.us/photo/my-images/802/car2.jpg/
http://imageshack.us/photo/my-images/440/car3ab.jpg/

[GT-R]

The first and third pics are the air intake pipes and they're suppose to be like that, you're OK!!!

The middle pic is your rubber stripping, that goes around the heat shield edges.

You didn't follow the instruction... well you missed a step.

Put the damn rubber strip on, start the damn car, check the CEL and any weird noises... if none, then punch the shit out and feel the POWAAHHHH!!!

[camryman54]

thank you! all sounds well; i just didnt know if i should plug up the holes or leave it open

[ChrisNYC11]

hey OP i was just wondering if you did this on your own or if you took this to a shop? I want to try and do this myself.

[bandit]

Originally Posted by ChrisNYC11

hey OP i was just wondering if you did this on your own or if you took this to a shop? I want to try and do this myself.

If he's asking for help and unable to get his car to work, he's doing it himself. If a shop did this and was unable to install a intake, they shouldn't be in business.

[GT-R]

Originally Posted by ChrisNYC11

hey OP i was just wondering if you did this on your own or if you took this to a shop? I want to try and do this myself.

It's not that hard, just make sure you follow the instructions very carefully. I'd rather do these things myself than taking it to a shop cause sometimes they take shortcuts and you'll never know..

[INDCWBY]

Is there any difference with the SRI? I'm planning to do the same with my 06 SE and 98 XLE.....