Need Help with my '05CAMRY XLE

[youngstylez]

hey.. ima newb to this forum.. im 16 with a 05 toyota camry xle.. theres alot of things i would like to do with my car now and in the future and i need some help and some advice... this is what i have now in my camry:

rockford fosgate 900 watts amp
12" JL subs (2)
APC Tail lights

that is all i have for now.. this is what i need help with..
i would like to lower my car about.. 1.5-2.0 inches.. what brand springs/coils do i purchase and where can i find them?

i have seen many pictures of the most recent camry's with angel eyes headlights. i would like to have those too. is there somewhere where i can buy a set of headlights that already have the angel eyes installed? if not, should i just look on ebay for a pair? are they hard to install?

also.. how do i put the LED strips inside the headlights. ive seen a few pics of that also.

PLEASE HELP!!!
thankss

[turtlehead]

trd/eibach springs or tien

[youngstylez]

where can i find the TRD/EIBACH springs? is there a website? I am also looking for a pair of headlights for a 2005 camry xle with angel eyes already installed in them. anyone got some to sell or willing to make some for me?

[itzsteven]

angel headlight is custom made. It's easy, the whole system (projectors + leds + hid units)=$500 ofcourse can be less but that's the estimate.
16 with a 05 camry, I hate you. J/K hehe. Welcome to the board.

[youngstylez]

haha. thankss for the welcome.. is there any websites or does anybody have pictures of step by step instructions on how to install the angel eyes into 05 camry head lights?

[Mosquito]

do you have any pics of your ride? especially the tailights

for angel eyes and other HID info check out this forum
http://www.hidplanet.com/forums/

[duggy]

why oh why did you put apc tailights?

[youngstylez]

first pic is when i put in new bulbs.
second pic is of my subs.. that sony amp isnt what i use. its jus sittin there haha. i have a rockford fosgate mounted behind the box..
third pic is of the tail light i have. i havent put the lights in yet tho.
what is wrong with APC tail lights?

[itzsteven]

you're from columbus right?

[youngstylez]

yeaa.

[youngstylez]

when installing the angel eyes for the gen 5 head lights... how do i do it? do i need to remove the front bumper in order to get the head light out? and when i do, i have heard i need to put in oven for a few minutes then taking them apart.. is that true? i really need help with. any one?

[itzsteven]

I don't know how to remove the headlight, but yes you will need to bake it in the oven to open the housing in order to put the angel eyes in.
Turn your oven to 250F for 20 mins. After 20 mins, turn it off and stick your headlight in (do one each time). Leave it for 20 mins and take it out. Start using a butter knife and cut around the headlight and open it. Do the same thing when you want to put it back together.

[youngstylez]

i leave the headlight in for 20 minutes?? some say just to leave it in for like no more than 7 minutes

[itzsteven]

trust me 20 mins (250f) is fine, i do it all the time

[youngstylez]

ok. thank youu. will i need to drill any holes anywhere??