Toyota Nation Forum banner

camry parts disassembly

2K views 4 replies 4 participants last post by  lilajto 
#1 ·
so ive been wondering how to take off some parts and i dont want to break any parts by trying. so this thread is all about how to take apart parts in a gen 6 or gen 6.5.

how do you take off the antenna
how do you take off this part. its the part above the glove box.

how do you take the part off that looks like an upside down shark fin?

how do you take off the part that has the mirror adjustors and holds the coin box?
 
See less See more
3
#2 ·
Antenna is just held down by double sided tape i believe..
you might have an XM radio antenna sticking out through it though.

and for the rest of the parts :dunno:

and which part is an upside down shark fin?

you might want to circle it with paint and then re upload.
 
#4 · (Edited)
Part above the glove box, u have to take out the glove box completely n u should see some screws. I thought I did when I took my glove box off when I rewired my radar detector. ;)

Part with the mirror switch will just pop off, it's just held by soft clips, pry it out.

Just be careful when taking the dash apart, cause they're all connected to one another, if it's stuck don't force it.

I tried taking apart the side a/c vents and I couldn't, it looks like the lower dash has to go first. But like I said, if it's stuck, don't force it, look for the part that's holding it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top