Modification Questions... - Toyota Nation Forum : Toyota Car and Truck Forums

daidaikonnootoko · 11-27-2002, 11:13 AM

Okay, I have five questions for everyone (and they've probably all been asked before, but I'm a moron, so I'll ask them again):

1. Where can I get clear corners for a 1991 Cam? I know they exist, but I can't find where... '91 = Gen.2, right?
2. Were there Z3 fenders made for this era of Camry, or was it just 1992+?
3. Were there any other body/aero kits made for the '91 Cam besides the Erebuni kit? (go to www.spoilers.com for pic)
4. Any springs made to lower the car more than 1.5" front and back? I can only find one Intrax product. Maybe adjustable suspension 0"-3" or something like that?
5. Altezza or Euro taillights made?

Thanks

***Eye8Pussies*** · 11-27-2002, 02:48 PM

I can only answer a couple of your questions, but here they are....

yes, you are driving a gen2, and you're right, there are clear corners, couldn't tell you from where tho..

there weren't ever any z3 fenders made for the camrys...you've gotta go custom...

yes, there are other companies that make kits....don't know which tho....

and if you get altezzas, you'll get shot

good luck w/ your modding! 8)

daidaikonnootoko · 11-27-2002, 04:30 PM

Quote:

Originally Posted by Eye8Pussies

and if you get altezzas, you'll get shot

Getting altezzas would be that bad? What about Euro clears? I wonder if R32 or R33 taillights would look any good on the car (with enough cutting and bondo)...

...Maybe I'll just re-paint the lenses...

Thanks for the input!

MTL1324 · 11-27-2002, 04:47 PM

Quote:

Originally Posted by Eye8Pussies

here they are....

and if you get altezzas, you'll get shot

good luck w/ your modding! 8)

Nice and subtle!!!

kgasso · 11-27-2002, 08:50 PM

1) Some overseas markets had cleared out ones... but none that I know of in the U.S.
2) Not that I know of
3) There used to be one made by Kaminari, but that was discontinued.
4) I think Intrax is your only option, and for struts you have KYB and Tokico
5) None that I know of

Unfortunately, there isn't much in aftermarket support for the Gen2 (even with as many out there as there are). Pretty much anything will have to be custom. Downside is it's expensive. Upside is it's unique (if you're going for a showcar, that is).

If you want some real inspiration for what you can do to a Gen2, you might want to take a look at some of Joey from TeamSC3's second gen camry pics. He's got a killer Gen2 show car.

http://stickydiljoe.onlineshowoff.com/