Turbo at low Psi

[Slow-yota]

I was wondering what the stock settin is for a stock waste gate for a ct26.. im planing on running about 8psi... if im not mistaken isnt the stock setting 14psi

boost controlers only raise the boost right? you cant go lower then what the spring in the waste gate is set at.. how do i lower that?

[ECale3]

I though the stock wastegate actuated at 7 psi.

[RedPhoenix]

Stock is 6-8 depending on a few things but.. 6-8.

You can cut the wastegate rod in half and put a threaded coupler between the 2 rods and you can twist it in and out to lower and raise the preloaded tnesion on the wastegate

[Slow-yota]

oh haha well now i feel stupid ... so it is about 7 psi, cool