|
Im building one for my turbo. Not using a kit because its actually a lot cheaper if you piece it all together. What it does it cool the intake charge because detonation on a lot of cases if caused by hot intake temps. by lowering the intake temp (with water injection its a considerable amount!) it has a decrease on risk of detonation/knock. Also water/alcohol (what im going to be doing) is good too, supposibly will burn better because alcohol is able to go boom boom. The water wont hydrolock because it goes to the gas state because it takes heat energy to convert it to gas (a cooling process).
I think its worth the money... its also a GREAT safety feature, which is the one extra step in taking to run my turbo safely on my stock internals.
Im using a 5psi actuator... so at 5psi the pump will kick on a spray inside, once its below 5psi it shuts off. I just need to find the perfect 12v pump and misting nozels. Also trying to find a "low windshield wiper fluid" sensor... dont know what to do for that.
hope this helped.
__________________

Sold ^
Quote:
|
Originally Posted by dysk8forlife
supercharger whine>girlfriend whine
|
Last edited by RedPhoenix; 01-17-2006 at 02:04 PM.
|