headlight wireharness

[lucanhookup]

well my left side headlight harness mealted and now sometimes when i turn on my headlights the side that has the burnt harness doesnt let enough electricity go thru so my headlight is like low yellow. i hit the headlight so it works normally. is there a way to replace this harness with heavy duty wiring? or just a diagram that shows the wiring so i can do it my self?

thanks a bunch

[HATEnFATE]

Toyota has wiring for those...if your local dealer says they can't get it they are lieing.
If you don't want to deal with your local dealer.....go to your local parts store and get a repair piece. it's not hard to do.

[DarkMastyr]

Just buy an upgraded wiring harness. You can find them all over, e.g. www.suvlights.com

[DarkMastyr]

or you can make one yourself for less than $20. You can find wiring diagrams on www.hidplanet.com

[lucanhookup]

thanks for the help, ill look into those links as soon as i can

thanks

[lucanhookup]

how do i know which one fits???

it looks like this one will...

http://www.suvlights.com/product_inf...roducts_id=122

yes or no?

[ASG14]

Best bet, if you do go stock again, is to just go clip one from a car in a junkyard, cut yours out, and attatch them. My friend just did it to his melted ones.

[lucanhookup]

Originally Posted by ASG14

Best bet, if you do go stock again, is to just go clip one from a car in a junkyard, cut yours out, and attatch them. My friend just did it to his melted ones.

yea thought of that. but i wanna use bigger guage wire. this also might help with resistance, get me?

[ASG14]

^ Yup Yup. Good point.

Maybe this should be moved to General Discussion, so people that can help but don't have a Camry will see it? Get more of a response? Just a though.

Good luck.

[DarkMastyr]

Originally Posted by lucanhookup

how do i know which one fits???

it looks like this one will...

http://www.suvlights.com/product_inf...roducts_id=122

yes or no?

That's just a replacement relay. You need the full harness.

http://www.suvlights.com/product_inf...roducts_id=112

Just pick the bulb you have (H4 I think). There's two options for H4. Either should be ok.

[lucanhookup]

Originally Posted by DarkMastyr

That's just a replacement relay. You need the full harness.

http://www.suvlights.com/product_inf...roducts_id=112

Just pick the bulb you have (H4 I think). There's two options for H4. Either should be ok.

ahhhh i see thanks a bunch, 63 aint bad but they better use bigger guage wire then oem wiring.....

thanks for the help everybody

[lucanhookup]

another question. there are 3 red wires on the harness. one has a blue strip, the other one has a white strip and the last one has a black strip. I'm assuming the one with the black strip is ground but which one is high beam and low beam on the other 2 wires? i ask this because i might just replace the plug since that's what melted and if it happens again ill replace the whole harness..............ty

[DarkMastyr]

Which image are you looking at? I don't see a blue strip here...

[lucanhookup]

^I'm not looking at that. I'm talking about the oem harness. it has 3 red wires like i explained before. i wanna know cause I'm just gunna replace the connector since that's what melted and if it happens again ill replace the whole kit.....

[DarkMastyr]

If all that melted this time was the connector, you're lucky. When an overflow of current occurs, it can fry any part of the wiring harness in your car. Next time it fries, there's no telling what part of your electrical system will go.