|
6spd, LSD, mods to E350/351
This is for the latest gen 4cyl manual tranny camry, unless the brand new one is out then I am not sure about it yet. I owned a 1990 V6 5spd(very rare car) and a 1992 4cyl auto(wifes car) I guess they were gen 2 and 3, not sure what the current one is, lost track so let me know please
One major issue will be to correct the terrible stock gear spread!!!!
If interested check out this thread
http://www.yoursciontc.com/forums/in...showtopic=9642
I am trying to get enough interest to have this done for us, will not be cheap though, we need ten units and then it will be made so  This will be stronger than a stock gear box and we may have more than one final drive ratio to chose from. It would be quite a bit less costly to stay with a 5 spd and drag racers may want to go that way but we have to do go with what we can get enough interest in.
The manf can make full dog boxes but they are really not that cool for the street, these will be in between full race and stock type gear design.
Next I will let the tC guys here and the MR2 owners know about this, some have been talking about using the E350 in thier cars.
Rick
__________________
Scion tC (soon to be tURBOCharged 
Carbon/Kevlar roof, Hotchkis, Wilwood, Enkie,
Racetech seats, Autopower roll bar, Tein, Clutch
Specialists, Phantom Grip, Arc Audio, MobileSQ.com
SCCA SM autocross, drags, track days, audio comps
Last edited by RAAMaudio; 02-27-2006 at 11:03 PM.
|