Headlight Help..PLEASE?

[ToyotaRulez]

I have a 92 camry and i just put clear corners w/ hyper blue LED bulbs, and the corners have LED bulbs too, so to complement the LED's i want to tint the inside of my headlight with a wide angled blue LED that i have already hooked up to my corners, is it possible to pop open the headlight, like separate the lens from the backing? so i could glue the LED to the top of the inside of the headlight?

Thank you all VERY much in Advanced!.

I'll have pics ASAP it's gonna look SEXY!!!!!!!!
*** just to recap, my overheating problem was due to a crack in the engine head *** So i overhauled the engine. ***

[Zandro]

Don't put LEDs inside your headlights the heat will destroy them, its pretty hot in there.

[ToyotaRulez]

for real?!!!!!!!!!!! but im putting them on my highbeam side, because i drive with low beams

[Eye8Pussies]

and yes, you can take the headlights apart- preheat the oven to 300-350degrees F, and then TURN IT OFF and place your headlight in it

- leave for 5 min or so, and then take it out and pry it apart
- if it still doesn't come off, put it back in for another couple of minutes until the adhesive melts

remember to turn off the oven, or else it will melt your headlight