I'm new here looking for rear suspension parts - Toyota Nation Forum : Toyota Car and Truck Forums

***SCEPTER300RR*** · 12-12-2001, 04:47 PM

I've checked out some mods by peeps in TTCC i like the rear sus mods that you guys have made through whiteline i have a Gen3 and was wondering how much u guys paid for the Whiteline rear suspension parts including the bushings. thanks..

p.s. oh yeah just signed up with TTCC even though im from BC hehehee... westcoast is represented there now!!! hehehe

speedemn · 12-12-2001, 06:46 PM

We had a group buy going and got a discount. Basically the bar, shipped, for Canadian residents was $165 CDN.

I do have 1 more bar but CamryKen has dibs on it since he asked me first. You can have it in case he doesn't take it.

Quote:

I've checked out some mods by peeps in TTCC i like the rear sus mods that you guys have made through whiteline i have a Gen3 and was wondering how much u guys paid for the Whiteline rear suspension parts including the bushings. thanks..

p.s. oh yeah just signed up with TTCC even though im from BC hehehee... westcoast is represented there now!!! hehehe

***Silver Streak*** · 12-12-2001, 07:07 PM

Quote:

On 2001-12-12 17:47, CAMRY300RR wrote:
p.s. oh yeah just signed up with TTCC even though im from BC hehehee... westcoast is represented there now!!! hehehe

I think there used to be a BC camry club...BCSCC...BC Solara Camry Club? Captain Tofu, you're from BC right?

***SCEPTER300RR*** · 12-12-2001, 08:10 PM

thanks henry but i searched hi and lo no camry club in BC ... hey im planning a trip to toronto for this coming summer... maybe then i can see ur car.. hehehee... i havent raced a doped up V6 before i like your webpage... unfortunately my page isnt done yet havent had lots of time been busy with school and stuff ... but i think my 4 cylinder could give your V6 a run ... i know im goin to lose buy hey its all out good fun rite? keep up the good work henry.. i really like wat u did with ur Gen 3 ...

Gen 3 ruleZ!!!

speedemn · 12-12-2001, 11:56 PM

How do you think you're gonna give Henry a good run in a 4cyl? What mods do you have? :smile:

Quote:

thanks henry but i searched hi and lo no camry club in BC ... hey im planning a trip to toronto for this coming summer... maybe then i can see ur car.. hehehee... i havent raced a doped up V6 before i like your webpage... unfortunately my page isnt done yet havent had lots of time been busy with school and stuff ... but i think my 4 cylinder could give your V6 a run ... i know im goin to lose buy hey its all out good fun rite? keep up the good work henry.. i really like wat u did with ur Gen 3 ...

Gen 3 ruleZ!!!

***SCEPTER300RR*** · 12-13-2001, 01:54 AM

speed demon ... i've raced a few v6 camry's here in bc no match.. v6 suped up accords.. dead... im aiming for much bigger targets now.. i've beaten SiR's and given type Rs a good run... i placed my mods stuff on TTCC and signed up with them already... i dont know if u can see it there yet... but i chatted with henry on icq already.. hehehee i dont know honestly if i can beat him.. but by next summer This gen 3 is not just another 4 door car... hehehee so speed demon what have u got?? tell me urs as well maybe we can swap ideas... thanks for replying...

humpty

speedemn · 12-13-2001, 02:42 AM

I checked our TTCC website and your mod list isn't up yet. What do you have under there to beat V6 Camrys and V6 Accords and Type R's??? You must have AT LEAST a turbo because honestly speaking most gen 3 4cyl engines are weak. Yes, there are exceptional engines out there in every class, and you could by all means be one of them as I think mine is even after 213,000 kms. But if I really did race a type R I don't think I'd beat them. Did you REALLY RACE those cars that you said you beat? As far as engine-related, all I have is pulley and cat-back. I plan on getting a 3S-GTE swap in about a year or less, hopefully.

As far as kills, I have domestic V6s of all kinds on my list including Mustangs and Camaros (V6 only). However if we were to race at 130km/h and up I wouldn't really have a chance... V6s have lots of torque. Some of the older 5.0s (fox-body and back)... I have beaten every suuped up truck that I have raced... the big V8s... (no Typhoon or Cyclone though... I wouldn't even dream of racing those). I did beat a few Civic Si's. Those are all the worthwhile kills. As far as sh**boxes, only 1 has ever beaten me but I will admit he was a GOOD standard driver... new Civic DX... ARGH! Oh yeah I did beat a few V8 Caddy's and Crown Vics... too much weight to pull on low end I guess.

Quote:

speed demon ... i've raced a few v6 camry's here in bc no match.. v6 suped up accords.. dead... im aiming for much bigger targets now.. i've beaten SiR's and given type Rs a good run... i placed my mods stuff on TTCC and signed up with them already... i dont know if u can see it there yet... but i chatted with henry on icq already.. hehehee i dont know honestly if i can beat him.. but by next summer This gen 3 is not just another 4 door car... hehehee so speed demon what have u got?? tell me urs as well maybe we can swap ideas... thanks for replying...

humpty

_________________

<font size=-1>[ This Message was edited by: speedemn on 2001-12-13 03:49 ]</font>

***SCEPTER300RR*** · 12-13-2001, 02:55 AM

speeddmn well i did a tranny swap .. i have a 5 spd now... i've pinned my needle to hit 140mph i've been pulled over in the u.s. in seattle and they've told me i was goin well over 150 so it was a criminal offence had to pay a big ass fine!! other wise the car is good.. she's a 93 LE with a bunch of mods done already u can check them out in TTCC i did beat those cars.. except the type Rs i just make it hard for them to win that's all but they still beat me im not that fast u know.. hehehee but soon ... very soon.. hehehehe i'll be there.. i'll hit my goal.. that's why the nick 300RR my goal is to hit 300hp with max torque of 360lb/ft i've seen this engine do it b4 in aussie.. i gotta find that site again when i do i'll post it up here for u guys..
nice chattin with ya speeddmn... chat me up sometime on aim or msn aight? laters dude..

***Silver Streak*** · 12-13-2001, 08:46 AM

Thanks for the kudos...nice chatting with ya.

The list is up, here it is:

Custom made red aluminum air intake
Optima sealed yellow top battery
5 speed transmission conversion
Unorthodox underdrive pulley
Brospeed Headers
Custom exhaust pipe 2.5 inches mandrel bent
Random technologies high flow cat converter
HKS hiper exhaust (from civic custom install)
MSD SCI
MSD SS Blaster Coil (external custom made cap)
Sparkco 9.5mm spark plug wires
Denso Iridium plugs
Exterior:
Piaa 1000X fog lamps
Piaa 9006/9005 head light bulbs
Clear bumper lense (not shown in picture recent addition)
Mbenz SLK side markers
TRD emblem on fender and Trunk
CamryS emblem by TTE on fender and rear bumper just above the muffler LE-R marking on rear trunk with the V6 sign Viper emblem on where the Toyota (T) emblem was on the trunk

Interior:
MOMO RACE red 13.1 mm steering wheel
TRD aluminum Shift knob
MOMO Pedals set 4 pc.
MOMO hand Brake and boot
Kenwood krc-705 Mask deck w/ 6 disc changer
Alpine Dddrive mids and tweets front speaker
Alpine V12 competition amplifier
Alpine digital graphic Equalizer
Kicker 10" Comp VR enclosed
TTE (Team Toyota Europe) emblems on rear deck speaker screens Scanner Led lights on windshield

Suspension:
TRD shocks (TRD Japan)
TRD springs (TRD USA)
Front Tower Bar

Brakes:
TRD HPZ pads front
Power Stop Crossdrilled Rotors

Wheels:
Stock Steel rims w/o hubcaps

You got some nice mods man...that five speed conversion kinda scares me! But that scanner LED thingy just might put him over the edge...

speedemn · 12-13-2001, 10:58 AM

Wow nice list of mods you got there! Quite extensive I'd say. I do not even nearly have the desire to spend that much on an old 5S-FE engine like mine even though it is running as if it is brand new. If I was gonna spend 4 digits, I'd get 3S-GTE and shut 99% of cars on the road up. :grin:

As far as your exhaust, do you think your 2.5" is better than what a 2.25" would have been? Our stock piping is between 1.75" and 2". I thought 2.25" would be optimal. Are you saying you can get more out of our engines with a 2.5"?? I would have to have a little talk with Richard at Brullen then... :wink: We didn't think that the 5S-FE has enough backpressure to go all the way up to 2.5". Henry has 2.5" on his V6 now.

I would have had headers on by now but I was thinking about slapping on the turbo kit on my 5S-FE... but now that I am not going that route... either I get the 3S-GTE swap soon and if not then I might get headers. I dunno where to go for it though.

Do you have any dyno numbers? Your car does sound strong. It would be a good race against Henry. I think you could take him off the launch cuz of your 5-spd and lighter car... but he will have you on top end. But I can definetly believe all your kills now. Keep up the good work man!!

BTW did you just add me on MSN last night? The e-mail address looked like it was a chick. :wink: DOH!

Quote:

speeddmn well i did a tranny swap .. i have a 5 spd now... i've pinned my needle to hit 140mph i've been pulled over in the u.s. in seattle and they've told me i was goin well over 150 so it was a criminal offence had to pay a big ass fine!! other wise the car is good.. she's a 93 LE with a bunch of mods done already u can check them out in TTCC i did beat those cars.. except the type Rs i just make it hard for them to win that's all but they still beat me im not that fast u know.. hehehee but soon ... very soon.. hehehehe i'll be there.. i'll hit my goal.. that's why the nick 300RR my goal is to hit 300hp with max torque of 360lb/ft i've seen this engine do it b4 in aussie.. i gotta find that site again when i do i'll post it up here for u guys..
nice chattin with ya speeddmn... chat me up sometime on aim or msn aight? laters dude..

benyu · 12-13-2001, 09:34 PM

First of all, I would like to say hi to Camry300RR.

Although I am in Ontario right now and part of TT-CC club, my Camry has BC plate :razz:. I am here for university.

I don't have any mods on my car...so I'll just shut up and read posts.

See ya later.

benyu · 12-13-2001, 09:44 PM

Oh by the way I am going back to Vancouver during X'mas.

My parents drive 96 Camry LE V6...Camry meet in Vancouver what do you say? :smile:

***SCEPTER300RR*** · 12-14-2001, 01:15 AM

sure thing ben... email me up or icq me i added u to my list u can get my ph# there.. call me up if u're in town aight?? ...

CorollaKen · 12-14-2001, 12:43 PM

Quote:

On 2001-12-12 19:46, speedemn wrote:

I do have 1 more bar but CamryKen has dibs on it since he asked me first. You can have it in case he doesn't take it.

Hey Speedemn,

I didn't know I was the only one :smile:
Let me know if it is mine for sure.
I've been home sick the past few days, so I haven't checked this site for a while.

Cheers,
CamryKen

speedemn · 12-14-2001, 01:03 PM

Yes I had like 3 Americans promising to buy it but now none of them are even answering my e-mails. I got this extra bar on good faith without even taking a deposit, and they aren't even bothering to respond to me now. Maybe they're off at the war or something. They like bombing stuff anyway! :grin:

So yeah, the bar is yours. I'll figure out shipping and you can send me a cheque or something (to save you any charge for a money order or paypal)... unless you can get money orders for free. I have an account that gives me free money orders. So you let me know.

Quote:

Hey Speedemn,

I didn't know I was the only one :smile:
Let me know if it is mine for sure.
I've been home sick the past few days, so I haven't checked this site for a while.

Cheers,
CamryKen