rear disc brakes for 2nd gen camry

[WVcamry3sfe]

I'm wondering if there is a way I can get disc brakes for the rear wheels in my 2nd gen camry. I know that the lexus ES from 1990 has disc brakes on all four wheels. is it possible to put the ES brakes and all that on my camry?

--I've got a 1990 camry 2wd 3sfe--

-AndyC

[JetspeedCamry]

Use the rear brake setup from a V6 Gen 2. Direct bolt on.

[atobe]

u don't need the ES fronts since they're already the same as the ones u have already... i got the V6 rear disk( haven't installed them yet) get the proprotion valve too

[nitrous3sfe]

Are you just getting a proportioning valve from a camry or lexus with 4 wheel brakes? I am guessing both will work?

[white90dx]

Originally Posted by nitrous3sfe

Are you just getting a proportioning valve from a camry or lexus with 4 wheel brakes? I am guessing both will work?

Both parts are the same.

The prop vavle is on the firewally behind the motor - it's the thing that has 6 or 7 brake lines going in and out of it.

-Charlie

[90camdx4]

Originally Posted by atobe

u don't need the ES fronts since they're already the same as the ones u have already... i got the V6 rear disk( haven't installed them yet) get the proprotion valve too

The 90 v6 camry has 277mm rotors also the 91 es250...on the other hand 89-91 3sfe 255mm, 89/91 v6 255mm rotors...i have 89 alltrac twin piston calipers on my gen 2 camry...wanna try and fabricate a bracket to use 277mm rotors. This is in Canada, i dont know if its the same for the U.S. Kinda weird huh

[boi_si]

i thought v6 camry and es250 is the same. you know what im talking about... the es is jus a step forward of a camry.

im sure the es will work too.

[nitrous3sfe]

Will the rear brakes from a non-GTS older celica work? What are some bigger front and rear brakes that will bolt up? Will the Celica GTS brakes fit?

[downsouthdx]

I just put rear brakes from a 1990 Celcia GTS on my 90 Camry so I know they will work. Just need new ebrake cables.