Footwell Light Kit

[RockXP]

Would anyone install this in there car?

http://www.newtoyotaparts.com/product/?id=2163

[Eye8Pussies]

sure....but then again...most of us have already done something along those lines...and it didn't cost 150bucks either

[WhiteRabbit]

^word, and mine looks 10 times better

[atobe]

a few leds and some wires could cost way less than 150$

[dna59]

Yup, it's much cheeper to make you own stuff than buy that kit.

[PBM]

holy cow mine cost like $7 with all the supplies and i have a three-way switch that either has it off, on, or on w/ doors open. but i used cathodes not LEDs since LEDs are a tiny light source and shadowing is terrible.

[WhiteRabbit]

^howd you wire the 3-way switch?

[DrewsCam]

wow mines better and cost like 20 bucks

[JMSinMD]

If anyone in Maryland has done this and is willing to help out a fellow owner please pm me. Thanks.

[thapranksta]

Originally Posted by WhiteRabbit

^howd you wire the 3-way switch?

I second that. I also want to see a picture of your switch.

[prnc_chrmng]

Originally Posted by Eye8Pussies

sure....but then again...most of us have already done something along those lines...and it didn't cost 150bucks either

very true, go down to autozone or your local rice store and buy some neon tubes (the 9in twin pack will probly work best) and go to town

[camrycoupe95]

You can pay me $150 and I'll hook some up for ya!

[PBM]

i have a 3-position horizontal rocker switch on my center console. middle position is off, left position is door/dome light activated, and right position is constant on.
wiring is pretty simple for the constant on, i just used the power wires behind the cig lighter.
the dome light wiring was used along with a relay (didn't want to tax that single dome light wire) again with the power coming from the cig lighter.

[Netforcer]

I'm planning on doing that in the fall... bypass the wires so that it lights up when the doors are open... and yes cold cathodes are the way to go