Clunking sound after installing Eibach springs?

[AVL92CAMRY]

I have had my Eibach ProKit springs on my GEN 3 Camry for a couple months now and ever since installing them i've had a clunking sound from the front struts when going over small bumps. Only @ slower speeds and it does not matter how the wheels are turned. I installed new struts @ the same time(KYB GR-2). All the rubber spring insulators are new too.

The only thing I can think is that the Eibach springs rattle against themselves a bit on small bumps. Its annoying! Very noticible in parking lots with cracks in the pavement.

Anyone else experienced this?

[ghettosled]

there shouldnt be any clunking noises. make sure everything is tight. when i installed eibach springs on my camaro, i didnt have a rear shock bolted on tight enough so it clunked on small bumps. also check your sway bay endlinks. maybe the bushings were damaged during the install.

[AVL92CAMRY]

Checked all bolts for proper torque. Everything was right. All bushings look fine and are tight. Thanks for the suggestion ghettosled. Had a friend cycle the suspension while i listened. The knocking is somewhere in the spring. Anyone else w/Eibachs have this noise???

[RedPhoenix]

i have the same problem, asg14 does as well. It seems to be a common problem with the kyb / eibach combo. so why did everyone recommend this again?

[WhiteRabbit]

im glad i got tokicos ...