Blown Fuse (window/door locks) 96 Camry

[Nuggy50]

I have a 1996 Camry LE that continues to blow the fuse that controls the power windows and the door locks. Not sure where the problem is coming from, but are there any suggestions of where I should start looking? I have always had problems with the right side window (goes up in increments) and the lock on the right side back door doesn't work.

Should I check each area for wiring problems? Is there any other way to check without dismantling the doors?

Thanks

Nug

[Mike Gerber]

I would start by checking where the wiring passes through the doors. The wiring there is subjected to a lot of flexing from opening and closing the doors. Wires can chafe as insulation is worn off and short to any bare metal around where they pass through the doors. In adddition, 2 wires there can have their insulation worn off and short against each other. Obviously, start with the driver's door. It get's the most use. Then I would move to the front passenger door.

Mike