My Camry Update

[Sportivo Concepts]

Some of you might remeber a while ago like 2 months I wrecked the Cam. And since then I have been busy working on it pulling and tugging on the frame bringing back into shape, and doing all sorts of work inside and out.

Well It has been taking longer than I thought. Some of the changes I have made is relocated the exhaust and tied it in with my lincense plate. Ok what I mean by this is using induction when the car is off and the engine is not running the plate gets sucked into the bumper. When the engine is running the plate is flipped so that it is visible.

The paint is completely stripped and inside gutted with the exception of a few things

I had a buddy of mines work on this he has done this on 2 of his trucks.

I'm in the process of making a custom grille for her as well as molding fog lights from the Solora into the bumper. I'm going for a Clean Sleeper Look.

I will be adding a rollcage this wednesday as well as braces and a intergrated childseat (for 2 yo daughter).

I will be working on some electrical work mainly running wires for amp and speakers as well as the center armrest entertainment system console replacing the stock armrest console.

Some of the things that will happen but don't know when yet is 4 wheel disc brakes getting rid of the drums in the rear. Engine modifcations, maybe a t/c or s/c for the 5S.

Taking a trip out to Japan for some light racing and pick up a few things. I may or may not do a rwd conversion and it looks like the Sequential Manual Transmission is a go once I get back from Japan.

Looks like I will also be bringing back a couple of cars 00 Altezza RS-200 Z Edition, a 01 Corolla X and a 96 Skyline GT-R (importing in for a buyer)

Be Safe
ONE!