just wondering on the gauge cluster bulbs - Toyota Nation Forum : Toyota Car and Truck Forums

djkow · 09-27-2003, 07:31 PM

Quote:

GEN 3 GUAGE CLUSTER BULB #'s

Just in case this is useful to anyone who needs gauge cluster bulbs
replaced, here are the part #'s:

For the Gear Shift Indicator (P-R-N-D-2-1) the part number for replacement
bulbs is 90072.02005

is that part for the one up on the dash? or down by the shifter? cuz the one up on the dash is the one thats burnt out for me

phatboy555 · 09-27-2003, 08:27 PM

i'm pretty sure they meant for the guage cause it says, "to anyone who needs gauge cluster bulbs
replaced"

and is it your 'D' that's burnt out...that seems to have happened on every gen3 i've seen

djkow · 09-27-2003, 08:29 PM

haha i should get my reading glasses out >.<

and yes its my D thats burnt out

TypeZer0 · 09-27-2003, 08:56 PM

Quote:

Originally posted by phatboy555
and is it your 'D' that's burnt out...that seems to have happened on every gen3 i've seen

most likely cuz they're used the longest. mine was burned out when i bought it used. then i changed it but i knocked the bulb on the 2 loose but i was too lazy to fix it til i put in my reverse indiglo's like a month later lol

phatboy555 · 09-27-2003, 10:34 PM

i haven't really seen it happen on too many other cars cept gen3 cam's

i don't really think those lights are necessary anyway, i don't think i've ever forgotten what gear i was in...

djkow · 09-27-2003, 10:37 PM

true but its kinda annoying...just a small thing

Redline · 09-29-2003, 01:01 PM

Hey....you too huh? Your "D" is burnt out...yah, you figure that Toyota would've realized that this would happen over time

I was originally thinking of either putting in indiglos, but none are available in KM/H....or I was gonna replace those fugly green gauge lights with some other colour...maybe either red or white.

Meh...who knows when that will happen. I don't have the time or money as of yet (especially with my fubar'd e-brake

)

Tell me what you guys do/did to replace that bulb, aight? thx!

Redline

TypeZer0 · 09-29-2003, 02:25 PM

i took the dash apart (the black trim that surrounds teh radio and instrument cluster) took out the instrument cluster and took out that PRND2L indicator section (held in by three clips, just use a small clamp to hold 2 of them while u squeeze the third and it'll slide out) and then u jsut take out the burned bulb and put in the new one. btw, i followed rayray's guide on his website to do all this