Camry & Solara LoungeDiscussion area for every generation of Toyota's family car, the Toyota Camry. Lexus ES250/300 owners welcome! Topics of discussion range from fuel economy, safety, modifications, performance and more.
what about the non-vvti gen 5? from the sound of it, it might fit.
__________________
i miss my mkii.
Gen 5 - 2002 Phantom Gray Pearl Camry V6 LE:
-TRD Rear Sway Bar
-SE Model Strut Tower Bar
-Borla Exhaust
-Injen Intake
-Sportivo Grille
-TRD Lowering Springs (sitting in my room waiting to be installed)
I did some math and figured that a fuel injector in the range of 300-320cc would be the perfect size injector for my needs. I looked at different Toyota applications and learned that the 95 GS300 used a 305cc injector. I obtained a set and had them flow tested and they were 305cc. Toyota dealerships and they provided me with a Toyota part number of 23209-46031 and said this is the same injector used in the following applications:
93-98 Toyota Supra NON-turbo
94-97 Lexus SC300
93-94 Lexus GS300 California Emissions
93-97 Lexus GS300 Federal emissions
You can use the 7mgte ones with some resistor packs.But even with a s-afc tuning will be off and you will run rich.Run a fmu and lower gas pressure to 30psi and see from there.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
ToyotaNation.com is an independent Toyota/Lexus enthusiast website. ToyotaNation.com is not sponsored by or in any way affiliated with Toyota Motor Sales, USA, Inc. The Toyota, Lexus and Scion names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.