APEXi SAFC settings for 1MZ-FE?

[Tony the Tiger]

I am in trouble here guys.. I need the settings for the SAFC... not the fuel maps and tuning, but I need the sensor input numbers, sensor calc number, type of sensor (hotwire, Flap, etc...), etc...

I am sure some of you guys got the SAFC running with no problems. Can you guys help me out on the settings you have used? Thanx in advance :smile:

[Ratko]

These are settings for the 1MZ-FE:

Sensor type: HotWire
-01 In 01 Out, 1 In 1 Out
-Engine Type is 6cyl (obviously)
-Throttle up (arrow pointing up)

hope that helps Tony!

latez.

[Tony the Tiger]

Thanks Ratko! Do you have the SAFC in your Camry as well? I am having trouble wiring the SAFC in my '94 V6 LE, and I am hoping that your Camry is also a '94 V6? The wiring diagram for the Solara or the Gen4 V6 doesn't work at all, and I am basically spending hours tracing the wiring on a full shop manual...and it sucks!

[Ratko]

On 2002-03-06 18:44, Tony the Tiger wrote:
Thanks Ratko! Do you have the SAFC in your Camry as well? I am having trouble wiring the SAFC in my '94 V6 LE, and I am hoping that your Camry is also a '94 V6? The wiring diagram for the Solara or the Gen4 V6 doesn't work at all, and I am basically spending hours tracing the wiring on a full shop manual...and it sucks!

Yeah, mine is a 94 V6 also, but I dont have an S-AFC yet. Im looking for one for around $500 or less (maybe you know where). Ive spent quite a bit researching the S-AFC and it looked pretty simple, except i need the wiring schematic of our ECU's so i know which wires to tap/splice.

How is it going so far? There is the power, RPM, throttle, and 2 grounds to tap, then there is the air-flow/pressure wire that needs to be spliced. You said you had the service manual, does it have the color chart/diagram for our ECU's?

thanks, and BTW- where are you mounting yours?
_________________

"One cannot be betrayed if one has no people." --Kobayashi

<font size=-1>[ This Message was edited by: Ratko on 2002-03-06 20:00 ]</font>

[Luc]

On 2002-03-06 18:44, Tony the Tiger wrote:
Thanks Ratko! Do you have the SAFC in your Camry as well? I am having trouble wiring the SAFC in my '94 V6 LE, and I am hoping that your Camry is also a '94 V6? The wiring diagram for the Solara or the Gen4 V6 doesn't work at all, and I am basically spending hours tracing the wiring on a full shop manual...and it sucks!

I have a friend's Toyota manual, and here is what I can see.

1) Throttle: blue wire on E7 (A) plug

2) Tachometer: black wire on E10 (D) plug

3) MAF: blue-black wire on E8 (B) plug

The 12V switched can be probed. From the manual, I'm not sure if B+ is 12V constant or 12V switched. For the ground, usually, it's a 14-gauge brown wire, but can be probed out also. But please check on these 3 first, I'm not 100% sure about them.

Luc

[aznchild808]

Luc,

Could you also find out what color and position the speed sensor wire is..

Also how do I know which plug is which D etc.

Thank you
SUGI

[Phi]

Originally posted by Ratko
These are settings for the 1MZ-FE:

Sensor type: HotWire
-01 In 01 Out, 1 In 1 Out

What exactly do these numbers control?

-Sens No-
In Out
01 01


AND


-Sens Cal-
In Out
1... 1

I plan on tuning in the near future and I'd like to get a better understanding of what these numbers actually do.

[Phi]

*Holy thread revival batman!*