attn: 1mz v6 owners

[zoni]

if anyone can take a look in their engine bay and see which heater hose goes to the black thin on the firewall, and which hose connects right to the firewall, that would be helpful... im looking for an answer like "the hose that attaches to the black plastic thing is the upper hose on the engine" or if it is the lower hose... "the hose that attaches to the black plastic thing is the lower hose on the engine that is right about the thermostat"

i need to know ASAP@!!!!

[warlock]

take a pic of it and i will look.but if i get it to late i will look tomarrow

[Phi]

does a pic of the enginebay help?

copy and paste link for high res pic

http://www.imagestation.com/picture/sraid90/p7439f963b9de5ebb411c87f536c813e1/fa76c1d5.jpg.orig.jpg

[zoni]

here is a pic...

[biggriggs]

thats one filthy engine

[warlock]

zoni pm me your email and i will send pics of where thay go

[warlock]

WTF i cant down load pic from my camra,i will try to talk you thru it
open the hood and stand on the drive side.look at the steering box (the round black thing) look to the left of it ther is are two hose inlets there one with a vac. regulator on it. look at the pic you posted see the one tords the back of the motor that one goes to the regulator.the other one goes to the one below it.i hope that helps.
i will try to get this damn camra to work so i can send you a good pic. but if you have more? i can tell you a little more

[zoni]

figure out the puzzle... A goes to 1 or A goes to 2...
file attached...

[I4 to V6 Swap]

Hey Zoni: good to see you are getting closer. I wish I was able to look and help. Glad you figured it out. Let me know your progess.

[warlock]

A goes to 1 and B goes to 2 as long as 1 is the top one
*lookin at my 1mz*