Mods where to start

[beck26]

i have a 2009 camry SE V6. i have a SRI and the borla exhaust. first i was wondering how to take the resinator off the exhaust and if there is welding and a llot of work involved.

second, where do i start as moding the enging? what would be my first low end stuff to increase power and torque? i know supercharger or turbos are high end stuff.

[beck26]

bump????

[beck26]

anybody? would love to have some input on thisl.

[ASG14]

There isn't anything. Buy a different car unless you have $4k+ to start with.

[JCamry94]

Work on your suspension!

Springs/Shocks, sway bar, strut brace, etc!

What is all that power good for without flying through the corners?

[beck26]

Originally Posted by ASG14

There isn't anything. Buy a different car unless you have $4k+ to start with.

4k? i want to do it in small steps not put the whole enging in at once lol.

[quangtran89]

Originally Posted by JCamry94

Work on your suspension!

Springs/Shocks, sway bar, strut brace, etc!

What is all that power good for without flying through the corners?

x2

[beck26]

where shoudl i beging w/the suspensin? got good websited for decent priced products.

[quangtran89]

Try motors.ebay.com

lol, I bought almost everything on my car from eBay. Except audio

[Gellenole]

Originally Posted by quangtran89

x2

++++++++++++

I enjoy taking turns a lot more than taking a straight road.

[catric69]

I don't know if you are close to Fort Wayne, IN or not. A member with a V6 Camry is needed to test fit some headers. Possible free set of headers to the beta tester.

[BDOGG001]

Originally Posted by beck26

where shoudl i beging w/the suspensin? got good websited for decent priced products.

For a fee,I could spell check a lot of these posts...

[SirThomas88]

Originally Posted by beck26

i have a 2009 camry SE V6. i have a SRI and the borla exhaust. first i was wondering how to take the resinator off the exhaust and if there is welding and a llot of work involved.

second, where do i start as moding the enging? what would be my first low end stuff to increase power and torque? i know supercharger or turbos are high end stuff.

Why would you want to take the resonator off the exhaust? Anyways, to do that just go to an exhaust shop and have them cut it out, and weld in piping to replace it.

Extend your SRI into a cold air intake for a cheap mod that can help.

[lammydi]

Originally Posted by beck26

where shoudl i beging w/the suspensin? got good websited for decent priced products.

You can begin by reading this sticky thread.
Let us know if you have any questions after reading the thread.

Gen 6 Suspension Thread(coils,spring, strut bar, sway bar,....)