Front tag on a 2009

[filter]

Is there a part to buy to mount a front tag? I've looked and can't find one. For one of my cars (forgotten which one now) in the past I was able to buy a front tag mount that was made to fit the curve of the bumper of the car. I'm hoping there's one for the Camry too.
Thanks.

[abew330]

its kinda ghetto but i would just use self tap screws..

[heartdisease]

I would be interested also. When you use just self tapping screws the bend in the bumper puts strain on the tag. It made part of my two piece tag pop out

[98CamryLE]

Originally Posted by filter

Is there a part to buy to mount a front tag? I've looked and can't find one. For one of my cars (forgotten which one now) in the past I was able to buy a front tag mount that was made to fit the curve of the bumper of the car. I'm hoping there's one for the Camry too.
Thanks.

Yes, there is a black mount that is made for the 2007-09 (possibly 2010 too) front bumper. They are often found on Ebay. Just search for something like "camry license" or something similar and some will pop up. Or you can search some online dealership parts catalogs and they should have it too.

Good luck.

[filter]

Original Poster here.
For future searchers, I'm sorry I didn't save the part number, but I finally found the front plate bracket for my Camry while combing the internet. With that knowledge I called my dealer and they had one for $16, and it included the large self-tapping screws. Maybe I could've started by calling the dealer, but maybe not since at first the guy quoted me a price of $60 (!?). I had to tell him he must be mistaken (I'd found them on the internet for $12-$18) and then he found the proper one in his computer. It fits the contour of the bumper area perfectly (of course) and looks a lot better than just putting a tag on there would. Thanks everybody.

[Mike Gerber]

I ordered this front license plate bracket when I ordered my 07 new. The part number is 47769-50010.

Mike