my new rims!!!

[augcam]

my rims just came in the mail, they are 18x8" ADR's and i was wondering if a 245/45/18 series tire would rub. if so could i fit an 235 on it? i dont want to roll my fenders, (i dont know how). i did a search and couldnt come up with any answers, so any heip would be great, btw i have a gen 4.5 I4. with 15's stock

[DrewsCam]

They should rub, i have the same tires 225/45/17
and there is more than an inch clearance

Should be ok, just try and see

[augcam]

thanks for the help! i like the clean look you got goin on!

[augcam]

btw the the 245's and 235's are wider than you tires would they rub when i turn the wheel?

[DrewsCam]

thanks for the comment check out my site for more pics,

nah, i dont think they should ive had no problems what so ever with the tires, in height or width

[augcam]

i also forgot to mention that i will puttin on a set of sprint springs, about a 1.8" drop, oops

[haa21]

Let us know if they rub. Will you need spacers?

[tightcamry129]

Originally posted by augcam
i also forgot to mention that i will puttin on a set of sprint springs, about a 1.8" drop, oops

well i was just going to ask this. If you lowered your car and put 245's on, hell yes it's going to rub.... also with a 18x8 rims? those are wide as hell... i used to have 17x7.5 wheels with 225 45 17 and whenever i would have crap in my trunk and would go over bumps and stuff, it would rub....

[augcam]

i looked on ebay for some spacers and they were like $100, is there a better place to find them, also what size do think i will need?

[BLUEMEANIE]

summitracing.com

Don't forget you also need to clear the bottom of the strut where it holds the spring as well as the fender.

[augcam]

damn, i hope these rims will fit, if i get spacers will i have to get extended lug bolts? i am lucky to have a lift and air tools at my diposal, do you think i could put the bolt on myself?