aiming screw

[_VVTi_]

hey ppl,
i DID a search on headlight aiming already. But the results i got back were mainly for GEN3 CAMRY, which tells you to aim your headlights using the screw on top of the headlamp to change the aiming vertically, and the screw behind the headlamp to aim horizontally.
HOWEVER, I can not find any posts about how to aim (VERTICALLY) a 97 CAMRY, I do see a screw behind the headlamp, but i dont' want to risk messing with it unless i'm 100% sure that's what the screw is for , because it's not my car.
Anyhow, can someone give me instruction on how to aim the headlamp for a 97 CAMRY?

AND, if there is a post that already has instruction on how to aim headlamp for a 97 CAMRY, please give me the link, because i may have missed it!!

THANKS GUYS!

[Nick]

could anyone with a gen 4 haynes/chilton manual can answer this rapidly...

check in your owner's manual, it may even be in there

[_VVTi_]

i don't think they have the manual, well at least i dun see it in their glovebox, but however, i will double check, thanks again.

anyone with gen4 haynes/chilton manual here?

[DIRTBIKEZ]

Take a good look at that "screw" you see. If there is any doubt in your mind that it may possibly adjust the headlight give it a shot. Just make note of it initial position (i.e. number of turns you adjust it from start).

[_VVTi_]

so i guess the only way to find out it's to risk messing with it huh? haha