Changing Motor Mounts on 3VZ-FE

[BigAirSkier1580]

... Whose done it? how hard is it? what am I looking at? Tips and how to do helpful if possible? I have Haynes, but it lacks specific details.

[SamMan23]

who has done it? any tips?

[Jase_on17]

This has been discussed many times in recent years, try the SEARCH button. I think Ratko even put together a great DIY.

[SamMan23]

I was not able to find any writeups or details about this. If someone could talk about some of the details about doing this it woudl be great.

[skewe]

what motor mount?
dog bone?
if dog bone, do a search cos i remember replying to it a month or 2 back

[dario]

Dog bone is easy I replaced it in 10 minutes. Just unbolt the two bolts take the old one out and put new tighten the bolts and you are done. Motor mount (one below the radiator) you have to jack you car up put some bricks underneath the engine and slowly lower you car enough for you engine to lean on bricks. Then you motor mount will be easy to replace. Transmission mount is rarely ever in need of replacing mine on 3VZ engine after 160 000 miles still loked new.

[Knailgun]

ohhhhhh....I know the answer.....use the search button, there IS a DIY in there

[RningOnFumes]

easy as one two three:


go up to the search tab..under "photo gallery"

click on it and down will drop a space to enter your quiry. [ Motor mounts )


hit enter.

IF your results aren't in ther first page...click to the next page. If your topic is very common, you should be able to get what you want soon.

IF your topic is uncommon then go ahead and start a thread after your search and just say so.


With that done go here here and here

d

sorry i read through the links i had...try this too

here--- how i replaceed my dog bone and front mount
here
here for a how to...suggesstions
here -- for a describtion to the mounts and
here for a pic/ diagram of the mounts===posted by camry ken