rpm on freeway

[toyotaholic]

i have a gen 4 4cyl 5speed camry . . . on the freeway the rpm is at 3000, just wonderin if this is normal, ive seen other cars where their rpm is between 2-3000 when driving on highways

[Stealth]

mine is around 3k when driving about 80 mph
varies slightly depending on temperatute outside though, i think

[toyotaholic]

im goin about 65 mph when rpm is at 3000

[toyotaholic]

when i past 70 mph, the interior + steering wheel starts vibrating pretty violently

[a94autoCamry]

^
for me , when i drive 80 mph (on the freeway, not the streets!)
the rpm is around 3k... so i'm pretty sure 3k is normal for 80mph
i wonder whats the rpm for a v6 camry going 80mph...

[Adam H]

3k is at about 85MPH for me.

[S-FL camry]

i went west palm beach to orlando this past weekend.... doign 110mph the whole way...... 2hrs drive, 3, 400k rpm very niceeee smooth ride for a camry

[powderblue91]

400k rpm? I want to see a camry do that j/k

anyway, at least you guys have a tach.

[cam2Xrunner]

If the tires aren't worn out or if you have a bad rim, you probably just need to get the tires balanced. cost like 20-30 bucks

[brungold]

yea man.. whens the last time you got your oil changed? if its been a while, you'll prolly notice a nice difference.

3K for me is at about 90 mph

also check your tires for abnormal wear or bubbles

[nort0188]

65mph is about 2500rpm with my V6... dunno about 80mph, I hardly ever go on the interstate

[CamryMax]

I get 3K RPMs when going over 75mph. That's normal. So is shaking and vibratingLOL Actually, today was really windy so I was swerving from one side of the lane to another... damn camry, I gotta lower it soon so I can drive like normal peopleLOL

[toyotaholic]

ive got 2000 miles left b4 my next oil change, so i doubt its that

[Nick]

2700 @ 110 kph

[SmokingTires]

Crusing speed should always be around 3,000RPM unless your really trying to put it down. That's where your shift points are when you accel at a normal (not pounding it) rate. It keeps strain off the engine. And you should be right around 3,000RPM at highway speeds.