corner lamp flashers

[BLUEMEANIE]

Originally posted by luisitol
ok sry for the dumb question, i looked in teh sticky it jsut had directions, but are we talking about the rear taillights or the front corner lamps? I'm assuming you're talkign about the rear

front corner lamps.


Luis -
Empty your PM box bro! I've been trying to get ahold of you all week about the xover and sub box!!! ...adn the disc's you're burning for me.

[CamryMax]

Originally posted by BLUEMEANIE
front corner lamps.


Luis -
Empty your PM box bro! I've been trying to get ahold of you all week about the xover and sub box!!! ...adn the disc's you're burning for me.

haaa and I was thinking it's for rear tail lights... is it still possible though? Without killing the parking breaks?

[luisitol]

Originally posted by CamryMax
I was gonna do that mod... but, it gets rid of your parking lights, right? When driving at night they won't be lit up (when you're not pressing the break pedal), I'm affraid someone gonne run into me like that

yea that comment mad eme think we were talking about the rear taillights.

Hmmmm makes me wonder now if that wiring could be done to the rear tails. hmmmmmmm....

Blue....cleared out some of my mailbox, i gotta finish going through that this weekend, but you can PM me now

[BLUEMEANIE]

You'd do the tails the same way. Both bulbs are the same as the front ones.

Originally posted by luisitol

Blue....cleared out some of my mailbox, i gotta finish going through that this weekend, but you can PM me now

Finally! ...ya slacker.

[WhiteRabbit]

yea i just finished doing mine this afternoon. was really ez, just spliced and used electrical tape, works great

thanks alot 88le

[ryuji16]

ehehe... im such a noob... which crimps am i supposed to get?

and since im such a noob, i dont think ill be trying the whole soldering thing. i dont have solder and it seems like something i will hurt my self while doing. thx anyway, i think ill go with crimps.

also what does it mean not to crimp on the seams, and are crimpers those plier-like things?

will reg. pliers work at all?

i think im gonna need more pics of the install itself...

would these be useful?:
http://www.allelectronics.com/cgi-bi...200&type=store

[WhiteRabbit]

you dont have to use a crimper at all, just expose the wires and then twist them together and tape it off with electrical tape. crimpers just make for a cleaner install with wire terminals.

[atobe]

i did this mod b4 but for some reason it didn't work, but i just did it again tonighbecause of this thread) and it worked. neato

[88 LE]

Originally posted by CamryMax
haaa and I was thinking it's for rear tail lights... is it still possible though? Without killing the parking breaks?

Yes its possible, but it would look kinda weird having 2 blinkers in the rear.

I've thought about rewiring the rear sidemarkers on my car (gen 2 Camry's have them), but never got around to it.

[88 LE]

Originally posted by WhiteR
you dont have to use a crimper at all, just expose the wires and then twist them together and tape it off with electrical tape. crimpers just make for a cleaner install with wire terminals.

I don't suggest twisting the wires together and taping it up. Its what I refer to as ghetto rigging.

If your going to twist the wires together, solder it, then tape it up.

[88 LE]

Originally posted by ryuji16
ehehe... im such a noob... which crimps am i supposed to get?

Insulated butt connectors.

also what does it mean not to crimp on the seams, and are crimpers those plier-like things?

will reg. pliers work at all?

If you look at a crimp connector theres a seam on the metal part of it. You don't want to crimp it on the seam.

Crimpers are kinda like pliers and wire cutters put together.

Regular pliers will work, but only for wire taps.

would these be useful?:
http://www.allelectronics.com/cgi-bi...200&type=store

Those are wire taps.

[88 LE]

Heres the pics.

Crimpers. Left - Klein... Middle - Thomas & Betts... Right - Cheap piece of shit crimpers.




Insulated butt connector:




Rest of the pics:

[ryuji16]

to solder the wires do i need solder or will it work to melt the wires together (if possible).

those pics are tite... but what view am i looking at it from?

the new ground wire running from the parking lamp to the 12 volt splits off into 2, one of them splicing with the 12 volt, and the other running off the picture. where does the other one go?

also the 12 volt from the corner lamp is spliced with something...

thx for the help thus far guys... maybe we can link those pics to the sticky as well

[WhiteRabbit]

couldn't this be done with the tailights? like make the rear side markers flash alternately with the rear turn signals?

[atobe]

yeah you'r gonna need solder and a solder gun

i don't know much about the pic mine looks way different.

anyone know where to get some super bright 194 bulbs ? amber ones would be nice