4cyl performance cams - Toyota Nation Forum : Toyota Car and Truck Forums

***zoni*** · 05-18-2004, 12:51 PM

I know this should be in the buy sell trade forum, but the auction is coming to an end at 10:45 est tonight, so i figured it woul get to the people that need to see the info here in the camry forum.

http://cgi.ebay.com/ebaymotors/ws/eB...category=33614

92CAMRYGTS · 05-19-2004, 01:11 AM

were you the one bidding on those cams. dammit you made the price skyrocket. iu was hoping to get them for 200 now they are 430. anyone on this board can get cams made for ther 5sfe. webcams had three different grinds that are made for the 5s. you just have to send them a set of cams and then they hardweld the new profiles onto the cam. new they cost around 600 from webcams. if anyone needs any help on getting info just let me know and i'll help yous out.

***zoni*** · 05-19-2004, 03:11 AM

wasnt me... it was pureplayer77313

i got a v6 now dude... i dont need them. i just found them while doing a random "camry' search on ebay... everyone knows i LOOOVVVE searching!!!! haha

also, i KNOW how to use ebay... bid in the last 10 seconds! price stays low, and you will usually win with a high enough bid.

TRD_Rob · 05-19-2004, 07:18 AM

Hi:

Who makes the Performance Cam Shaft for 4Cyl. 5SFE camry engine ????

Are there 1 or 2 cams needed for this engine ??? from the ebay auction, looks like 2.

Also will it make a noticeable difference in performance ???

Any Opinions ??

Thanks
TRD_Rob

88 LE · 05-19-2004, 08:05 AM

^ Webcam makes the cams for a 5S-FE.

http://www.webcamshafts.com

Theres 2 camshafts (intake & exhaust).

CamNub · 05-19-2004, 09:04 AM

I think rippmods said somethin about they had some special cams. Can anyone with connections with the owner ask if they will sell them seperate?

luisitol · 05-19-2004, 10:36 AM

yea he has basically everything you would need and hes selling it for a cheap price so if you'r elooking to go turbo hit him up

luisitol · 05-19-2004, 11:54 AM

yea i think he ws talkign abotu 600. good price since he has jsut about everythign if i remember correctly. I wish he would part it out but i think he wants to sell it as a whole. and its meant to work on a 5sfe so i't'd be great for someone trying to do a 5sfte.

92CAMRYGTS · 05-19-2004, 01:17 PM

zoni i am pureplayer. i was able to pick up the sams from the guy but at a much hgiher price than i wanted to. but it still saved me somemoney from buying the new.

the 5s has two cams so you would need to order two from webcams. you can order only an intake or an exhaust cam and it wll make a differnce but not as much as both would make.

luis you are right about the 600. i've been talkin to the guy for the past few days about his cams and turbo kit. he sent me a pic of it. he also said right now someone is going to give him 600 but if someone offered more then he would take it. he got a fix it ticketit cali and it was just too much for him to keep putting it in and taking it out so he just doin a 3sgte swap.

on wecams webpage they only list two grinds but there are three. the third one you have to ask fro because it was first a custom grind from an mr2 company.

luisitol · 05-19-2004, 01:34 PM

whats the third grind they offer

92CAMRYGTS · 05-19-2004, 02:37 PM

the one i am getting is the middle grind. the big grind i think you might have to do a little head work to make sure everything clears.

294 Grind:
322 lift on both
Duration: 218 @.050

577 Grind:
330 lift on both
Duration: 226 @.050

101 Grind:
350 lift on both
Duration: 228 @.050