body piece transfer

[initial-T]

ok, lets say i bought another gen3 camry.

and lets say on my current one i added a razzi lip for it and installed it.

could i move the lip from the old gen3 to the next one without ripping it up? its plastic.

or if the next one was a gen3.5 would it fit?

[stock93cam]

wouldnt the lip just be connected by screws or w/e...u could just unscrew it??? or do they install a differnt way

edit...isnt the gen 3.5 bumper a little different...i know the bumper lights are...if they body shop has to make mods to the lip to make it fit a gen 3...i wonder if they could still make it fit a gen 3.5

[initial-T]

ya its held on by screws and double-sided tape. i wonder if the double sided tape would rip the paint off of the bumper when i removed it.

[phatboy555]

depends on what kind of double sided tape you use...if it's that industrial type that they use on airplanes and what not...i'm not even sure if you can get that off lol

other than the strength of the tape, you shouldn't have a problem...if you can transfer a full bumper, a lip shouldn't be too big of a problem

[initial-T]

like lets say...that 3m double sided tape? should that tear the paint off my stock bumper when i remove the lip?

[stock93cam]

Originally posted by initial-T
like lets say...that 3m double sided tape? should that tear the paint off my stock bumper when i remove the lip?

if thats the worst that happens...its not that bad...just get some touch up paint and you are good to go

[Marvelicious]

I'd use some heat. Easier to clean up tape residue than repaint!