LED Underbody install help...

[Ruffrydasean]

I have a white LED underbody kit, can mount the front & back just fine but where/how the hell am i supposed to mount the sides, everything is pretty much thick ass metal on the sides...

I got a white kit because i have an odd color car and any other color would look weird

O yea.. check my Cardomain page.. i updated it slightly... >.>

[luisitol]

What year is ur cam? If its a Gen 3 mount it right inside the metal lip that is on the frame. Just drill a few holes and then screw it in. Thats how i did mine, the real pain in the ass was the rear on mine.

[whocares04]

did u run the wires to a central location, then thru into the controller or did u run each wire to the controller individually?

how bout some pics showing where the lights are installed?

[Ruffrydasean]

97 LE V6, for the front i just mounted bar right behind the black plastic protector thingy... i have no idea what the hell the name of it is, the back i had it mounted on the end of the bumper(farthest in towards the car). The lights work and all but i had no idea how to mount the sides. I guess i can try the lip when it gets warmer.. unless someone else has better suggestions...

[prnc_chrmng]

i used some of these clamps

[Knailgun]

I can't help unless you have a body kit...I drilled into the underside of mine and zip tied it on. Works awesome.

[Ruffrydasean]

I'll probably end up drilling the lil lip on the sides then..I'll get my bodykit in the summer maybe....