Turn Signal to Fog Conversion

[RedPhoenix]

Alright, basic question before I go to bed, short and brief.

Im going to change my corner lights to turn signals

Buy some clear bumper lights. I was wondering if I can convert those to 900x series bulbs. The actual work on putting it in the lense isnt a big deal, what I am wondering is the harness, will it be able to take that current? Stock is i think 25-30 watts, the 900x series im looking at seems to be 50-80 watts.

I searched but saw nothing really about this. If its not to hard to do the rewiring, Im all systems go to do this. Ill even do a write up

[dna59]

Wouldn't the bulb melt the housing.

[chronoti]

the harnest wount take the current, also the clear turn lights arent shealded or have anything to keep the light low, so your gona blind people , i have thought about it tho.

what you would need to do is split the houseing open (no idea how) and install a cheap foglight behind it.

or wait till i get some money and make a set of mazda 6 fog lights work on my car

[RedPhoenix]

Originally Posted by chronoti

the harnest wount take the current, also the clear turn lights arent shealded or have anything to keep the light low, so your gona blind people , i have thought about it tho.

what you would need to do is split the houseing open (no idea how) and install a cheap foglight behind it.

or wait till i get some money and make a set of mazda 6 fog lights work on my car

Alright, wondering where I can find small fog ligths taht would fit inside of those bumper lights

[_VVTi_]

Hella Micro DE is probably your best bet.