Need Tech Info On Leds - Toyota Nation Forum : Toyota Car and Truck Forums

majorgercko1 · 07-25-2005, 11:08 PM

Did some research but did not found an exact answer. I have a gen 5 02, and i want to change the leds on the ignition ring. I opened it up and noticed that the leds are smt, and thy are 90 degrees angel. In other words they dont point up like most leds they point to the side. Also the AC bulbs what kind of bulbs are those, i notices you could take em off just by turning it. The alarm flashing led i am interested too. The blinkin one, that one is a led. Does any one know this info, thanks.

88 LE · 07-25-2005, 11:15 PM

For LEDs try:

http://www.mouser.com

http://www.digikey.com

http://www.jameco.com

majorgercko1 · 07-25-2005, 11:19 PM

Yes, but i need to know which ones.

terrastrife · 07-26-2005, 12:06 AM

any that fit... take the originals out first :P

Super Kaioken · 07-26-2005, 02:50 AM

i wonder what size bulbs they are......www.superlumination.com is a good one too.

i think they're like 24s maybe. 194s would be too bright.....either 24 or 74

Dj-torn · 07-26-2005, 07:28 AM

Not to intrude on your post, but i wanted to do the same thing, but i wanted to get the Ash tray, Glove box, and the shifter light (P R N D 2 1) what size bulbs are those...anybody?

For the Lights on your speedometor, look at this how to;
http://www.sounddomain.com/member_p...6257&page=6

Keep · 07-26-2005, 08:16 AM

I've gone to

www.superbrightleds.com

they were great

RedPhoenix · 07-26-2005, 08:24 AM

3mm or 5mm, 5mm is bigger

majorgercko1 · 07-26-2005, 08:36 AM

Thanks for the sites but again i need to know the type of leds i need. Smts and leds and bulbs. what kind: example, speedometer are 3.5X2.8MM SMT LED