Sound deadener, how much? - Toyota Nation Forum : Toyota Car and Truck Forums

SilverStreak05 · 11-10-2005, 10:06 PM

How much deadener should I get to do the 4 doors on my truck? Probably gonna do 1 layer on the outer skin and 2 on the inner. Figured I'd give myself something to do while I piece the system together.

LiquidClen · 11-10-2005, 10:12 PM

Read this thread and you will get an idea of how much you need

http://www.toyotanation.com/forum/t64909.html

SilverStreak05 · 11-10-2005, 11:26 PM

Yeah...I read that thread before. All I saw was a few mentions about how much they used to do an entire car. I want to get a ballpark figure for the doors only.

leasaunce · 11-10-2005, 11:34 PM

i did all my 4 outer skin doors, on my camry. costs me $150aud ($110usd) that was with FLASHTAC. i'm gonna buy some more from eBay 4.5sq Meter for $110usd so i can do the door panels.

Anshu · 11-10-2005, 11:36 PM

ask rick from raamatt if you can get half a rolll
That should cover the 2 front doors

SilverStreak05 · 11-11-2005, 02:21 AM

A full roll should do me then, coz I've got 4 doors. Thanks for the info.

***cam2Xrunner*** · 11-11-2005, 02:53 AM

My front doors in my '05 took 20 sq ft per front door of Raammat. The other part of the roll Might be enough for the rear access cab doors too.

I'd get 125 sq ft and do both the front and rear doors well then just hang on to the rest for when you want to do the rest of the truck(you will end up wanting to do the rest

)

Don't forget the Ensolite

http://www.elitecaraudio.com/forums/...hreadid=120799