power doors connection

[RussianMafia]

hey yall i just got my power door kit off Ebay i paind 25 bucks for evrything its pretty good. i Have toyota tercel 94 and i installed alarm system in the shop last summer its something like Barracuda I think so right now i dont have power lock doors from stock but i want to install these which i boght. does anyone know in what place i have to run the cables from power lock motors to alarm system so when i push the unlock button my doors gonna open. if yall know what im talking about pls respond i really need yo help .... thank yall brothers

[88 LE]

Run the wires through the rubber grommet/boot in between the door and car.

Detach both ends of the rubber grommet/boot from the door and car. Then use a coat hanger or a piece of welding rod, tape the wires to one end, and pull the wires through the grommet/boot.

You'll need some relays and switches if you don't already have them. And you need to find the door lock/unlock wires on the alarm.

[RussianMafia]

yea thats what i actually need lock unlock wires on the alarm