Which one bumps harder

[Camon19z]

I just had a quick question which subs will hit harder, i want some alpine type r's but they sell the 2ohm verision and the 4 ohm version which one will hit harder i have a alfasonique mono block.

[cam2Xrunner]

How many subs are you getting, are the subs dual voice coil or single voice coil? What ohm load is your amp stable to?

[warlock]

alot of amps are better with the 4ohm duel voice set up. but if you brige it right and run the wireing on the speakers right you can run the 2 ohm setup.

it would help us alot if you gave us the amp. and the speaker you are planing to run.

[Camon19z]

the amp is the ALPHASONIK PMA300HCA
I WANT IT TO BUMP AT ONE OHM BECUZ THATS WERE THE POWER IS AT 1X900
THE SUBS I WANT ARE THESE http://cgi.ebay.com/PAIR-ALPINE-SWR-...QQcmdZViewItem but they have it in a 2ohm load as well as for which one would be best for my setup?

[Camon19z]

here

[Camon19z]

here is the link for the specs on my amp http://www.woofersetc.com/index.cfm?...&Product_ID=50

[touringcamry]

If you want 1 ohm, get the dual 4 ohm version. Wire all the voice coils in parallel and you will have a one ohm load.

If they have 2 ohm single voice coils, that works also - just wire them in parallel to get 1 ohm load. If they're DVC 2 ohm, don't get those because you cannot get a 1ohm load from that.

[Camon19z]

ok thank you for the info

[lZl jody lZl]

Is it possible for a 300 dollar amp to be 1 ohm stable?

[NorCalTacoma]

Check Elemental Designs. They have some 1-ohm stable amps at a good price. A little more than $300 but well worth it.

You could always find a 1-ohm stable Hifonics amp for $220. They work too, they are legit.