Install help for 07 Tacoma

[Cajun]

I just started putting a system in my 2007 Taco Doublecab.

This weekend I put in an Alpine CDA-9857 HU. I wired it to the stock speakers, steering wheel controls and routed my Ipod cable into the glove box


Next step is to put my Boston Acoustic 6.5" seperates in the front doors and 6.5" coaxials in the rear doors. I'm powering them off of a 200 watt amp under drivers seat.

Here is my questions:
Whats the best way to route the RCA cable from the HU to the amp under the seat? Can I go under the center console.

What's the best way to route my speaker wires from the amp to the front doors? I have to mount the crossovers for the front speakers. I was considering mounting the crossovers under the passenger seat but then I have to deal with 4 sets of wires to route back to the dash and onto the doors. Is there a good place under the dash to mount the crossovers so I can just route 2 sets of speaker wires from the amp to the dash?

Thanks in advance

Cajun

[Corollacrazy42]

Well.. you could always try zip tying the crossovers up to something under the dash. Also running the wires through the door loom is the easiest way to go from the HU to the speaker.

RCA's can run anywhere.... just kinda depends how clean you want it to look..