component or 2/3-way speakers

[built2burn]

I have a camry 99 le, so I have no obvious place for a tweeter(LE has no tweeter and no "vent" to place one so i would have to customize or something) so would a 2/3 way speaker be better

I am also looking for an pretty easy install and not too expensive(no more than $100 for the 6.5 in the front)

Is it recommended to get shallow mount 6.5'' if available(i know infinity has some)

how much of a difference is an amp going to make?
i'm getting(i think) a DEH-P590ib HU and it has
Peak: 50 watts x 4 chan.
RMS: 22 watts x 4 chan.

quality>quanity

o ya this is the front speakers

Thanks

[MrSo0h0o]

if you are getting component speakers, amp them.. there is a huge difference.. as for mounting issues, i would look into getting baffles made to house the woofer and the tweeter. i had mine done by MrMarv here on the forum.. search his name and u will find him.. here are the ones he made for me:

[touringcamry]

Is there an acoustic advantage to having the tweeters mounted there instead of up by the door mirrors or was it for convenience.

[MrSo0h0o]

it is always good to keep the tweeter as close as possible to the woofer(2-3") to reduce the chance of separation.. i have had this component setup in a few diff ways.. 1st was woofer in the door, tweeter in the door panel.. 2nd was woofer in the door, tweeter in the A pillar.. and this is the third with the woofer and tweeter in the door... despite the fact that the first 2 setups were in a diff car(still a camry, just a 93), the SQ is sooo much better in my new car.. the highs were too pronouced when they were positioned in the door panel and a pillars. of course it is partially driver preference too.. oh another minor reason why i put them in the doors is because i want my system to look as stock as possible..