|
Big problem with alarm install. Brakes are locked.
I had a friend (has installed a few hundred alarms before) install the new Clifford RSX 3.3 in my 2006 Tacoma(manual) yesterday. At first we were going forward with a remote start setup, but ran into issues and started back tracking.
In about 20' of driving the truck begins to apply the brakes lightly and it keeps building pressure. After about 40' they are just about fully on. After a battery reset and a 10min wait it is fine again.
Any suggestions? We completely removed the remote start and its relation to the brakes.
__________________
2006 Tacoma TRD Sport 4x4 (Nav, Clifford Alarm, Scan Gauge, Grillcraft, Volant Intake, Custom Light Bar w/Piaa's)
Tires & Lift to be coming soon
1993 Turbo Mustang Hellion Power Systems (66mm turbonetics, built motor)
|
Linear Mode
