|
The best way to do stereo wiring and not mess anything up is to take everything out of the car, seats, carpet, and plastics. Then lay the wire in the paths u want and tape it down so it can't move. Keep the rca's as solitary as possible, away from power wires and each other, so that u don't distort the signal. also think about where you are gonna be installing speakers in the future and lay wire for them to, wire isn't that expensive and u don't want to have to do this again. In the long run this will save u time rather than trying to snake wire under the carpet and it will be a better quality installation. (My list says i have a std cab pickup but i have installed a complete stereo in an integra and a volvo 740 which were my previous cars)
__________________
Honda CBR 954RR
89 Toyota V6 4x4
|