2 channel amp - Toyota Nation Forum : Toyota Car and Truck Forums

stock93cam · 08-03-2004, 01:00 PM

is a two channel amp is sufficient for powering 2 subs?

stock93cam · 08-03-2004, 01:22 PM

i was thinking about his amp

http://www.crutchfield.com/S-3eNbRxG...002T&s=0&cc=01

to power 2 of these

http://www.crutchfield.com/S-3eNbRxG...1041&s=0&cc=01

DarkMastyr · 08-03-2004, 01:32 PM

You should be fine as long as they're bridged. I myself would rather just have a straight up Class D sub amp. That's what they're designed for. You don't need 2 channels for subs really. You can't tell the difference anyways with frequencies that low.

eddiem67 · 08-03-2004, 04:37 PM

That amp will not run 400 watts bridged, maybe 250-300, get a different amp

Luc · 08-03-2004, 05:52 PM

If you run both subs in stereo, it will work, but not as loud as you may like it. The amp will not run 2-ohm mono stably if you bridge both channels to run the subs in a parallel fashion.

synco357 · 08-04-2004, 08:02 AM

I have a Rockford Fosgaate 600 watt Amp (NEW)
360.00 shiped
email me if your serious: synco357@aol.com

Andre

It is there competition series