Instructions: How to Program Solara Key (2000-?)

[Phi]

I found this at another site that I thought I'd share;

Here's a little more specific sequence for the key itself...

To Program An Additional Key:
1) Place an already programmed Master key (one that works all locks) in the ignition, but DO NOT turn on.
2) Press the GAS pedal five (5) times.
3) Press the BRAKE pedal six (6) times.
4) Remove the key from the ignition.
5) Insert the new key, but DO NOT turn it on.
6) Press the GAS pedal one (1) time only and wait about a minute for the security light to quit flashing.
7) Remove the key and Press the BRAKE pedal one (1) time only.
Wait at least ten (10) seconds, then re-insert the new key and start the car.

You can have a maximum of ten (10) transponder keys programmed into your car.

http://www.zer0.info/solaraguy/viewtopic.php?t=6835