If you're using the IVAD300 (or D310, might as well get the newer one) you won't need the RUX controller. You can control the processor from the DVD screen.
So what do you need help with on the amps? Are you looking for a lower priced alternative?
What do you mean you need help on them? Do you want suggestions on different amps? If so, what do you want to spend?
yea i need to pick out some amps for the subs and the iridium speakers. i need help with them . i really dont care about money but id say 1500 for all the amps i need
yo im liking those dls amp but im confused on the rms power my mids,tweet,midbass,and subs are going to get becuase it doesnt show the power rating as rms or peakpower. so what exactly are all my speakers going to get? thanks a bunch cam2xrunner
The A3 will send 150 watts rms to each Midbass of the DLS 6.3
The DLS A4 will send 75 watts rms to each tweeter and 75 watts rms to each midrange.
The A6 will send each sub 600 watts rms when wired into a 1 ohm load. So you will definitely want dual 4 ohm subs.
Where they say Typical power @ 4 ohm they mean RMS. Their numbers are pretty spot on if not underrated some.
So you getting ready to pull the trigger soon?
thanks alot and yea im very excited about my syste. im going to strart buyinh soon but i perfer a amp that will give the tweeter and midrange 100watts rms. and a amp that will give the subs more power cuase there rms is 1000watts. so........
The IDMAX's dont need 1k watts. In fact you might be better off not running that much. I really do think you'll be satisfied with that setup. If you really want more power you are going to have to look at bigger more power hungry amps(and the DLS A series amps already are)
You can go with a DLS A6 to each sub. Running at 2 ohms with 870 watts rms to each sub. My friends running a single IDMAX off an A6 at 2 ohms.
The midrange and tweets don't need 100 watts each driver. 75 will be plenty.
They're not cheap, but they are very high quality. Email Scott for a quote.
For a price reference, go to www.froogle.com and price it out, it will most likely be cheaper through Scott.
i went to that website u gave me cam2x and i went to contact us and click on scotts name but i couldent e-mail him. do u have his dirrect e-mail?thanks
DLS A6 are 399 ea+shipping, A3 are 499+shipping, an A6 will do about 1200 watts at 1ohm, I was running the same amp before I switched to Tru Amps. Buy 1 A6 and if you feel its not enough buy another later. Cam also mention the old PPI art series, hese are very good amps as well, just not as efficient as the DLS amps.
My other suggestion would be a pair of Arc Audio 2500's the Arc/ID Max combo sounds the best. For fronts:
This guy is selling Tru amp for mids and tweets:
Up for sale is a Tru Tech T4.65 BURRED in excellent condition, any newer would be brand new. Amp comes with original box. 425 shipped
Another guy is selling a 2 channel for midwoofer
2.100 with box asking 350 shipped
Your cost for a pair of 2500's, a T4.65, and a 2.100 would be around 1500.00 This would be the bes SQ amps I have ever spec'd on paper.
__________________
Iraggi Alt ->SVR ->Eclipse ->Tru Technology ->DLS / Image Dynamics / Marv Enclosure / Rammat
Gen 4 V6
For Sale: Adire Audio Sadhara Sub System, Bryston SP1 Video Switcher, Totem acoustics speakers
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
ToyotaNation.com is an independent Toyota/Lexus enthusiast website. ToyotaNation.com is not sponsored by or in any way affiliated with Toyota Motor Sales, USA, Inc. The Toyota, Lexus and Scion names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
. i really dont care about money but id say 1500 for all the amps i need
Linear Mode
